Rear sprocket aluminium gold, NSR250 MC18 / MC21
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0104-37T - TYSR-0104-44T
SKU: hon-10397 - hon-10404 Categories: ALL products, By product, Honda, NSR250 MC18, NSR250 MC21, Sprockets, Sprockets, SprocketsCarbon silencer guard (race) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0047
SKU: ktm-10143 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSet pipe full race system WSS300 (no silencer), KTM RC390
€680.90
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0159
SKU: ktm-10197 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsShroud inner right, Honda MSX125 GROM
€6.86
Shroud inner right OEM Honda part
TYGA no: 83560-K26-900
SKU: MSX-10024 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSilencer carbon/carbon end cap, round, 2" x 380mm
€426.38
Silencer carbon/carbon end cap, round, 2" x 380mm
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
* Please note that a decibel killer cannot be used with our carbon sleeved silencers.
TYGA no: EXSL-0081
SKU: hon-11012 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Carbon swing arm cover, Suzuki RGV250 VJ22
€305.44
These lightweight carbon covers fit over the stock swing arm on the ‘banana arm’ swing armversion of the VJ22.
Very popular product, many swing arms have scratches, so with this beautiful carbon product you get rid of the scratches and also get that GP look.
Note, this product will not fit the later braced type swing arm
TYGA no: BPCC-9020
SKU: suz-10086 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiExhauststay, Suzuki RGV 250 Tyga
€61.59
This product is to be used exclusively with our TYGA Seat cowling kits for the VJ22. These include BPFS-0036, BPFS-0037, BPFS-0038.
This stay is designed to mount to TYLY-0028 subframe and secure the silencers of the the exhaust system. Will secure TYGA silencers and possibly others (we have no information on this) and because they are not ‘handed’ you can use them for both left and right sides. One TYLY-0029 is supplied in the kits and is sufficient if the motorcycle being fitted has the silencers stacked on the right side. (TYGA GP Style). If the motorcycle has side by side silencers with one exiting on the left and another on the right, it will be necessary to order an additional exhaust stay for the left side silencer. The subframe has securing points and all you need to do is to trim the undertray of the seat cowling in order to fit.
TYGA no: TYLY-0029
SKU: suz-10006 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Exhausts, RGV250 VJ22, Shop, Suzuki, Universal partsTyga Step Kit Replacement Rear Brake Lever, Black, MSX125 Grom
€64.46
Tyga Step Kit Replacement Rear Brake Lever, Black, MSX125 Grom. Complete with bearings.