Carbon screen, KTM Duke 125/200/390
€52.00
This fly screen replaces the plastic item and is an easy installation.
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCX-7031
SKU: ktm-10005 Categories: ALL products, Carbon, Duke 125/200 2012- 16, Duke 390 2012-16, KTM, ShopKitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
€55.41
Kitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
Must be used with Kitaco I-Map 763-1432010 (MSX-10309)
TYGA no: 763-1432581
SKU: msx-10470 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSet, pipe full race system oval carbon/carbon end LH exit, VFR750F gen 4, 94-97
€1,300.90
Set, pipe full race system oval carbon/carbon end, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0122
SKU: hon-11015 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
€1,425.22
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0133
SKU: hon-11044 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Set pipe Full race system WSS300 (street), KTM RC390
€1,155.39
Set, Pipe, Full Race System, WSS300, (Street) KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0111
SKU: ktm-10146 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsFront fork overhaul kit, Honda MSX125 GROM
€55.41
Overhaul Kit, MSX125 Grom
Description:
Special fork disassembly / assembly tools for MSX125 Grom front forks.
31mm fork clamps with hole location will hold the fork stanchions securely, during overhaul.
14mm Hex wrench ideally cut to length to fit through the hole in the fork lowers to reach the socket head cap.
TYGA no: TYTO-0010
SKU: MSX-10326 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Tools, Various parts, Various partsSection, Collector, Intermediate, Lower, Stainless, VFR750F, 3rd Gen, 90-93
€66.48
TYGA no: EXPT-5151
SKU: hon-11348 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carb Service Kit A, 40 pieces, Honda VFR750R RC36 (90-93)
€81.92
Carb Service Kit A, 40 pieces, Honda VFR750R RC36 (90-93)
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC36 (1990-1993)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MT4-000)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x OR-040 Air Cut Seal, Material Viton 70A (Part of Honda Kit No. 16048-MM5-671)
4x OR-006 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x OR-018 Vacuum Breather O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x OR-011 Overflow O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x CS-004 Choke Plunger Cap, Material: HNBR (Part of Honda assembly 16047-ML7-004 or 16047-MAJ-870)
Please check that your Honda uses the oval shaped air-cut ring, that is part of the Honda air cut valve assembly (part number 16048-MM5-671), to ensure that this is the correct kit for your motorcycle before proceeding with your purchase.
TYGA no: CKA-Honda-VFR750R-RC36 (90-93)
SKU: alg-10348 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750F Gen 3 90-93