Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Seat set street RC211V, NC30

637.59

(771.48 inc. VAT )

This set of bodywork is designed to replace the stock NC30 seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.

This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:

BPFS-0027 (street carbon)

BPFS-0028 (race GRP)

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

TYGA no: BPFS-0034

SKU: hon-10068 Categories: , , , , , ,
Read more

TYGA stepkit replacement left side hanger mount (adj), Ninja 400

80.30

(97.16 inc. VAT )

TYGA Step kit Replacement Left Side Hanger Mount (Adj) Ninja 400, Assy

TYGA no: STAH-0055AL

SKU: kaw-10113 Categories: , , ,
Read more

Handle bar clamp left ” hinge type” black, KTM RC390 2014 -24

106.61

(129.00 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: TYLY-1731L

SKU: ktm-10213 Categories: , , , , , , , , ,
Read more

Carbon tank shrouds with grill (pair), Honda MSX125 GROM

184.44

(223.17 inc. VAT )

Carbon tank grilles to decorate your MSX125 Grom. Replaces the nasty plastic stock items and transforms the appearance of your bike. Uses original Honda mounting points and screws. Requires removal of the bodywork but the results are well worth the effort. See BPCC-7128 for an alternative product.

TYGA no: BPCC-7828 

SKU: MSX-10125 Categories: , , , ,
Read more

Harness Extension, Headlights, RC36-2, RC30 Style

32.25

(39.02 inc. VAT )

Steering Stopper, Honda VFR750R RC36 (94-97)

Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.

TYGA no: TYWH-0007

SKU: hon-11483 Categories: , , , , ,
Read more

Upper Cowling (Street GRP), NSR250 New GP2010, Assy.

243.42

(294.54 inc. VAT )

A GP250 style upper cowling, improved for 2010. Sleeker and 300grams lighter than our previous BPFU-0005. This fairing has excellent aerodynamics for racing or road use. To be used with the parts below.

Compatible Parts:

Tyga lower cowling: BPFL-9114 Will not fit stock NSR250 lowers.

Requires headlight BPLT-0004 and screen SCRE-0084 or SCRE-0085.

Read more

Exhaust stay left (tyga), Honda NSR250 MC21 – MC28

59.59

(72.10 inc. VAT )

Due to requests from customers with MC21 and MC28s wanting more support of the Tyga exhaust system when used withGP Race Tail kits, we now have this product designed to be retro fitted with our GP Race Tail kits:

BPFS-0003, BPFS-0004, BPFS-0005, BPFS-0006, BPFS-45, BPFS-0046, BPFS-0059 and BPFS-0060

The stay is provide with bushes, nuts and bolts to mount to the subframe. Note, you will need to drill the subframe TYY-0007 to install this stay and some adjustment of the seat cowling may be required.

Please note this product is ‘handed’ and you need one of each TYLY-0100L (Left) and TYLY-0100R (Right) for one bike.

TYGA no: TYLY-1100L

SKU: hon-10374 Categories: , , , , , , , ,
Read more

Athena cylinder set with piston (pair), set 2 Aprilia RS250 – Suzuki RGV250

1,204.91

(1,457.94 inc. VAT )

This cylinder kit  is a direct replacement for the original (OEM) cylinder from Suzuki/Aprilia and this means it can be installed without making any changes to the engine crankcase. Same porting and all sizes the same.

Read more