Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Carbon Meter Cover RGV250 VJ21

31.39

(37.98 inc. VAT )

Carbon Meter Cover RGV250 VJ21

Attractive carbon cover for Suzuki VJ21 RGV250 meter assembly.

For fitment, push it over the instruments on one side until the foam compresses a little, you will then notice that the cover will then slide freely in towards the centre of instrument a couple of mm, allowing you more slack so you can locate it on the opposite side of the instrument. You need to locate over both rev counter and temp gauge at the same time. Once in position and properly located, you will notice it will slide around somewhat so, pick out the backing tape and the adhesive will hold it into desired position on the foam instrument surround. Alternatively, remove backing before installation but be careful not to lose adhesion or let cover get stuck in wrong position before you are satisfied it is properly located.

Fits all VJ21 Models

TYGA no: BPCC-0055

SKU: suz-10135 Categories: , , , ,
Read more

Set, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28

795.00

(961.95 inc. VAT )

Set, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28

Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.

For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ on left hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock foot peg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)

The NSR250V design, is provided with silencers clamping hardware which mounts directly to the NSR250V seat cowling BPFS-9043 or BPFT-9143 via exhaust stays TYLY-0243 for a more secure and firm installation.

By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.

Please note this product fits MC28 only although it can be installed with the MC21 if the MC21 has an MC28 swing arm installed. For the MC21 with a stock MC21 swing arm, please select EXCS-0005A

This product, EXCS-0047, has one chamber exiting left and one chamber exiting on the right in a high position similar to the NSR500V race bike. As a consequence, this system is only suitable for motorcycles without passenger foot pegs. For motorcycles with passenger foot pegs, please select EXCS-0006 and EXCS-0005B

Parts included with this product:

1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts. Be sure to select the correct type. 70mm for silencers EXSL-0083 and EXSL-0084 and 60-61mm for silencers EXSL-9005, EXSL-0003, EXSL-0004, EXSL-0065 , EXSL-0066 and EXSL-0067
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.

Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set. Note, we recommend that if you are installing this exhaust with seat set NSR250V BPFT-9043 or BPFT-9143 then order exhaust stay set TYLY-0234

TYGA no: EXCS-0047

SKU: hon-11045 Categories: , , , , ,
Read more

Koppelingdeksel Takegawa voor Honda MSX125

373.83

(452.33 inc. VAT )

Koppelingdeksel Takegawa voor Honda MSX125

High performance with high quality and durability.

Specially designed to have quick access to the clutch.

Also room for a thermostat and in/outlet for a oil cooler.

Read more

Carbon fairing stay side 87mm (pair), universal

82.47

(99.79 inc. VAT )

Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.

Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and ‘R’ clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.

Dimensions:

BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.

BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.

Compatible products:

TYGA upper cowlings, BPFU-9033 and BPCU-9033.

TYGA no: BPSY-0144

SKU: hon-10537 Categories: , , , , , , ,
Read more

Carbon tank cover, Yamaha R6 2008-12

233.15

(282.11 inc. VAT )

Uses original fixing points and Velcro provided to secure in place.

Direct replacement for original Yamaha part

TYGA no: BPCC-7009

SKU: yam-10021 Categories: , , , , ,
Read more

Top triple clamp black, CBR250 2011 –

187.52

(226.90 inc. VAT )

CNC machined TYGA top triple clamp (without detachable ignition switch holder for race use) for your CBR250R and CBR300R.

Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.

Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.

The detachable ignition switch/lock holder can be ordered separately or together with this product as set TYLY-1069

TYGA no: TYLY-1069(p)

SKU: hon-10188 Categories: , , , , , , ,
Read more

Exhaust Hanger Stay, Pair, Carbon, RGV250, VJ23

108.42

(131.19 inc. VAT )

Rear Hugger/Chain Guard (Carbon), VJ23 RGV250

The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.

IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.

Complete with all fitting hardware.

TYGA no: TYLY-0245

SKU: suz-10204 Categories: , , ,
Read more

Front fender stock shape red, Honda RVF400 NC35

123.70

(149.68 inc. VAT )

Same shape as original, painted red to match the RR and RT colour schemes

Compatible Parts:

All Tyga Performance and Honda OEM panels.

TYGA no: BPFF-0004 (Red)

SKU: hon-10512 Categories: , , , , , ,
Read more