Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Headlight, GP-T, Assy.

369.67

(447.30 inc. VAT )

Headlight, GP-T, Assy.

This stylish headlight, designed by, and unique to TYGA Performance consists of a total of 4 LED light units arranged in two pairs with 2 on dip and all four illuminated on high beam. LEDs use very little power and draw a lot less current than the stock headlight unit. This TYGA headlight will make your presence known to other road users and emit a bright blue/white light.

Note this product does not comply to any road legal regulations and it is not recommended for high speed riding at night on unlit roads.

Compatible Parts:

Tyga Upper Cowling BPFU-9035

TYGA no: BPLT-0027B

SKU: hon-10721 Categories: , , , , ,
Read more

Section header, rear left stainless, VFR750F gen 4, 94-97

119.01

(144.00 inc. VAT )

Section header, rear left stainless, VFR750F gen 4, 94-97

Header, Rear left, used on:

EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer

TYGA no: EXPT-3119

SKU: hon-11026 Categories: , , , , ,
Read more

Upper stay GP-T, Honda RVF400 NC35

93.23

(112.81 inc. VAT )

Lightweight GP style upper stay to use on the NC35 GP-T fairings. Can be used with RC211V style and T13 too (the GP-T is slightly narrower but otherwise identical)

Compatible parts, BPFS-0145 and BPFS-0147

TYGA no: TYLY-0139

SKU: hon-10591 Categories: , , ,
Read more

NGK sparkplug R7282-10, short

58.94

(71.32 inc. VAT )

NGK sparkplug R7282-10, “short” (alg-10227)

The short version of the R7376 plugs if clearance is a problem. NOTE: NGK TRS1225 cap required.

Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4″) Reach, 13/16″ (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020″ (0.508mm) Gap.

NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.

Read more

Set pipe Full race system WSS300 (street), KTM RC390

1,155.39

(1,398.02 inc. VAT )

Set, Pipe, Full Race System, WSS300, (Street) KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: EXPS-0111

SKU: ktm-10146 Categories: , , , , ,
Read more

Handlebar clamp Silver, Honda MSX125 GROM

52.45

(63.46 inc. VAT )

Handlebar clamp CNC machined from 6061 T6 aluminium. Light weight and stylish. Available in two colours, silver or black.

Simple replacement for stock clamps, using stock bolts and bolt caps.

Read more

Complete Bodykit set Type 1 Black, Honda MSX125 GROM

329.98

(399.28 inc. VAT )

Complete Bodywork Set, MSX125, Type 1 Asteroid Black metallic Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom.

This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!

All the products listed in this set are individually available. Click on the images below and it will take you to that product page.

TYGA no: BPFS-7028B

SKU: MSX-10110 Categories: , , , ,
Read more

Silencer kevlar/carbon SHORTY 60mm 2 stroke

156.20

(189.00 inc. VAT )

This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40kg) is made from CNC machined end caps joined by a Carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.

Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.

Compatible Products:

All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!

Other Alternative Products:

EXSL-0065 Shorty Carbon

EXSL-0067 Shorty Aluminium

EXSL-9005 Aluminium

EXSL-0003 Carbon

EXSL-0004 Carbon/Kevlar

Read more