Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Silencer aluminium round 43mm, Kawasaki ZXR250 2008 –

216.12

(261.51 inc. VAT )

Silencer, Aluminium, Round, 43 mm. x 380 mm., Assy.

This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.

TYGA no: EXSL-0033

SKU: kaw-10021 Categories: , , , , , ,
Read more

Tyga Step Kit Replacement Right Side Hanger, MSX125 Grom, Black, Assy.

90.48

(109.48 inc. VAT )

Replacement right hanger for your MSX125 Grom TYGA Step Kit. Complete with mounting hardware and bushes.

TYGA no: STAH-1036

SKU: MSX-10408 Categories: , ,
Read more

Silencer stainless steel round /carbon end cap 380mm (4 stroke) 2

271.40

(328.39 inc. VAT )

Silencer, Stainless/Carbpn End Cap, Round, 2 x 380 mm., Assy.

This silencer has polished stainless steel endcaps and a hairline finish stainless tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.

Read more

Triple clamp set CNC black RVF to fit NSR, NSR250 MC21

698.63

(845.34 inc. VAT )

Triple Clamp Set, CNC Black, NC35 Forks to fit MC21

CNC machined TYGA triple clamp set for the MC21 to take NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

Front forks are not included and are shown in photos for reference only.

TYGA no: TYLY-1541

SKU: hon-10296 Categories: , , , , ,
Read more

Handlebar Clamp, Right, Silver, 41 mm.

93.45

(113.07 inc. VAT )

Replacement Right handlebar clamp for handlebar set TYLY-0077

TYGA no: TYLY-0077R

SKU: alg-10284 Categories: , ,
Read more

TYGA step kit replacement left side hanger (adj), Ninja 400

35.12

(42.50 inc. VAT )

TYGA Step Kit Replacement Left Side Hanger, (Adj) Ninja 400, Assy

For STAA-0026

TYGA no: STAH-0055BL

SKU: kaw-10121 Categories: , , ,
Read more

Front Fender, (GRP), Unpainted, MSX125

80.45

(97.34 inc. VAT )

Front Fender, (GRP) Unpainted, Stock Shape, MSX125SF

Direct replacement for original part.

This is a part made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.

This Front Fender has the same shape as the second generation MSX125SF stock front fenders, and will also fit the first generation MSX125 /Grom

TYGA no: BPFF-7428

SKU: MSX-10397 Categories: , , , , ,
Read more

Rear Brake Light Switch Kit

13.49

(16.32 inc. VAT )

Rear Brake Light Switch Kit. Please specify the model you will be using this on because the spring length varies.

Note you will need to drill and tap a hole in the underside of the rear brake lever, if it has not already been done, in order to install this kit.

TYGA no: STAC-0009

SKU: alg-10280 Categories: , ,
Read more