Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Silencer GP-T, Aluminium 60mm, Two Stroke, Spring Mounted

95.39

(115.42 inc. VAT )

Silencer GP-T, Aluminium, Two Stroke, Spring Mounted, Assy

To complement our NX5 exhaust chambers, we wanted a silencer design which was both functional and classic. The result is this TYGA Performance GP-T style silencer. Available in three models, with carbon, carbon/Kevlar and aluminium outer tubes and with stainless end caps, it is mounted by two springs (included) for ease of installation and for looks. The silencer is strong and easily rebuildable, using rivets to assemble. Remember to order two silencers for every twin cylinder exhaust system! Also see EXSL-0069 and EXSL-0069.

Note, this silencer is only compatible with the NX5 RS250R exhaust system and cannot be mounted on other exhaust chambers in our product range.

TYGA no: EXSL-0070

SKU: hon-10903 Categories: , , , , ,
Read more

Carbon rear fender Dax German

170.08

(205.80 inc. VAT )

Rear Fender, (Carbon) German Type, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!

TYGA no: BPCF-7137

SKU: MKY-008 Categories: , , , , , ,
Read more

Upper Cowling, Race, Carbon Unpolished, KTM RC390 WSS300

379.14

(458.76 inc. VAT )

Upper Cowling, Race, Carbon Unpolished, KTM RC390 WSS300

Replacement Upper Cowling. WSS300, MUST be used with KTM WSS300 hardware

see also:

BPFU-7331 (GRP)
BPCU-7331 (Carbon Clearcoated)

TYGA no: BPCU-7331U

SKU: ktm-10164 Categories: , , , ,
Read more

Stay upper, ram air, NX5

24.41

(29.54 inc. VAT )

Throttle Housing. NSR250, HRC, Assy

This throttle is a reproduction of a factory HRC one used on the factory NSR250s in the 1990s and similar. For one of our projects, a customer kindly sent us the scan of the HRC part and from that we were able to reproduce this almost impossible to find part. The actual housing is CNC machined in 6061 T6 aluminium. The machining marks are then removed by bead blasting and then the part sprayed black to faithfully reproduce the look of the original factory cast one. The actual throttle is 3D printed in tough Nylon. The throttle uses an M6 type cable adjuster screw to secure to the cable and about 45 degrees of rotation of the throttle, for 32mm movement on the throttle cable.

Note, this is not plug and play for any motorcycle that is available from Honda or even HRC for that matter. It was designed for unobtainable factory NSR250 motorcycles and the like and will NOT fit your MC21, MC28 etc. However, it is an interesting and useful product for anyone wanting a special looking throttle and willing to adapt it to their project. We wanted this for our NX5 factory racer project which is still in development and we plan to hook it up to Keihin SPJ carburetors. If anyone else wants to do a similar project then hopefully, this will useful to them.

TYGA no: TYLY-0227

SKU: hon-10988 Categories: , , , , , ,
Read more

Kit, Fairing Set, NC30, Stock Shape, Painted Type 1

979.15

(1,184.77 inc. VAT )

Fuel Tank, Carbon, VFR400R NC30

Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).

Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).

Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.

Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.

TYGA no: BPFS-0216

SKU: hon-11405 Categories: , , , , ,
Read more

Exhaustset race Stainless steel (high level) double Stainless steel Silencers, NC30 NC35

1,276.81

(1,544.94 inc. VAT )

This exhaust system includes everything you need to replace the stock system. It includes, stainless pipe work, twin carbon silencers, springs, gaskets, silencer clamp, mounting stay and all other mounting hardware.

This system can be used with stock Honda or Tyga bodywork/subframes

Dynograph shows totaly stock 35 compared to modded bike , twin stack tyga system, 1 layer race foam, short stacks, 125 mains front and rear, standard cdi.

TYGA no: EXPS-0158

SKU: hon-11323 Categories: , , , , , , , ,
Read more

Carbon tube round 58 x 290 mm, TYGA 2 stroke

62.59

(75.73 inc. VAT )

Made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers.

It is also suitable for other manufacturers’ silencers of the same dimensions.

Read more