Upper cowling Suzuka, Honda NSR250 MC21/MC28
€164.57
wide Suzuka 8 Hour style upper cowling which mounts to either Tyga or stock lowers. This product is provided with a clear headlight cover, tinted to special order. Uses the MC28 screen not provided.
Compatible Parts:
MC21 and MC28 OEM lower cowling, Tyga lower cowling: BPFL-0001
Tyga Performance Accessories:
requires spotlight BPLT-0001, NC30 headlight and screen SCRE-0021 pr SCRE-0025
TYGA no: BPFU-0008
SKU: hon-10235 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopKit, Fairing Set (GRP), Honda NX5 RS250R (ram air)
€908.45
Kit, Fairing Set (GRP), Honda NX5 RS250R
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (BPFU-9036)
The upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (BPFT-9036)
Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR racer look as ridden by Ukawa and Okada. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Stay NX5 RS250R (BPSY-0213)
Screen Clear NX5 RS250R (SCRE-0168)
TYGA no: BPFS-0172
SKU: hon-10904 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSubframe RC211V/T13, Honda NC30/NC35
€136.84
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: TYLY-0025
SKU: hon-10300 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Seat set street with carbon, aluminium subframe, Suzuki RGV 250
€933.77
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown below which are also available separately.
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-1036
SKU: suz-10214 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSet, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer/ Carbon End Cap ,VFR750F, 3rd Gen,
€1,271.03
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0153
SKU: hon-11327 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carbon radiator bracket MK2, Aprilia RS250
€61.22
Carbon radiator bracket MK2, Aprilia RS250 (apr-10081)
Nice carbon part, better looks for your bike and good replacement for that heavy steel one
TYGA no: 004704KT/P
SKU: apr-10081 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopExhaust stay GP-T, Honda VFR400 NC30
€71.27
This exhaust stay is designed to be used with our GP-T kit for the NC30 and attaches to subframe TYLY-0133. Note for NC35, use TYLY-0175
TYGA no: TYLY-0174
SKU: hon-10593 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, VFR400RR NC30Stud, Exhaust #1 8×22, MC28
€1.36
Stud, Exhaust #1 8×22, MC28
TYGA no: 92900-08022-0E
SKU: hon-11101 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28