Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

VHM piston (15mm piston pin) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10

137.00

(165.77 inc. VAT )

Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)

Complete Bodywork kit which consists of the following products:

Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)

The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.

Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)

The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036

Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)

This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.

Seat Support NX5 RS250R (BPFX-9036)

Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)

TYGA no: APHO12521708 + size

SKU: alg-10400 Categories: , , , , ,
Read more

Silencer aluminium premium SHORTY 60mm 2 stroke stainless endcap

113.23

(137.01 inc. VAT )

This shorty (55mm shorter than our other 2 stroke silencers) aluminium two stroke silencer offers the same excellent value for money that our silencers always have but now with improved build quality and precision

– CNC machined mounting end cap with 3 holes precision drilled for mounting to exhaust chamber flange

– stainless steel exit end cap and nozzle

– cartridge glass wool insulation for greater longevity

– lightweight: weighs just 0.6 kg

– tough anodised body finish for enhanced looks and weather resistance

– Silencer is designed with a built-in sealing ‘O’ ring and stainless steel bolts and washers are provided.

Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.

Compatible Parts:

All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!

Other Alternative Products:

EXSL-0065 Shorty Carbon

EXSL-0066 Shorty Carbon/Kevlar

EXSL-9005 Aluminium

EXSL-0003 Carbon

EXSL-0004 Carbon/Kevlar

Read more

Tyga Step Kit Replacement Brake Link, CBR250R/CBR300R

18.78

(22.72 inc. VAT )

Tyga Step Kit Replacement Brake Link, CBR250R/CBR300R

This replacement part fits to the Tyga step kit brake lever on the CBR250R/CBR300R adjustable step kit etc.

TYGA no: STAC-0010

SKU: hon-10791 Categories: , ,
Read more

Under Cowl, Belly Exhaust Type, (GRP), White, MSX125

196.87

(238.21 inc. VAT )

Under Cowl, Belly Exhaust Type, (GRP), White, MSX125

Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:

– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models

– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)

See table below for more information.

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

<a href= {{media url= wysiwyg/46-undercowl-bpfl-cl-7328-online-e5eb2cb5.pdf }} target= _self >Click here for PDF</a>

Read more

Carbon exhaust guard left, KTM RC390

100.33

(121.40 inc. VAT )

Exhaust Guard, Left, Carbon, KTM RC390 Serpent

This is not a simple cover, but a thick and very strong carbon part. Looks cool but also made to guard you, not getting burned by the silencers.

Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed.

Compatible with the following TYGA exhaust systems:

EXPS-0061

EXPS-0062

TYGA no: BPCC-0021L

SKU: ktm-10061 Categories: , , , , , , , ,
Read more

Exhaust Chamber, Left, Side By Side Type, MC21/28

349.54

(422.94 inc. VAT )

This is the bare left side replacement chamber for EXCS-0005

TYGA no: EXCB-0005L

SKU: hon-10887 Category:
Read more

Kit, Bodywork, GRP, stock shape, NSR250 MC21, Painted Rothmans

1,604.24

(1,941.13 inc. VAT )

Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22

CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.

Please note this product is only available for delivery in 7 days

TYGA no: BPFS-0205

SKU: hon-11280 Categories: , , , , , , ,
Read more

Cartridge glas wool, TYGA 2 stroke silencer

10.81

(13.08 inc. VAT )

This is a replacement glasswool cartridge ideal for repacking Tyga or other similar sized two stroke silencers.

Easy to install, clean and long lasting. Overall length 290 mm. X 58 mm. diameter

Read more