Exhaustset race Stainless steel Silencer Stainless steel oval , NC30 NC35
€1,059.04
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0017
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0012
SKU: hon-10102 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30lower cowling (GRP), stock shape NSR250 MC21/MC28
€241.47
Lower Cowling (GRP), NSR250, MC21/28, Stock Shape, Assy
This part is a direct replacement for the OEM Honda left, right lower, right mid and inner cowls and has the ‘shark fin’ and front ducts retained. Compatible with stock and Tyga exhaust systems.
Compatible Parts:
Can be used with the following upper cowlings: MC21 and MC28 OEM upper cowling, Tyga upper cowlings: BPFU-0001, BPFU-0002, BPFU-0003, BPFU-0006, BPFU-0007, BPFU-0008 and BPFU-0022
See also
BPFL-0001 for similar product
TYGA no: BPFL-9001
SKU: hon-10915 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Upper/Mirror Stay for TYGA Endurance fairing, NC30
€95.36
Upper/Mirror Stay
Upper /Mirror Stay for Endurance TYGA fairing kit for NC30. Similar to stock item but positions mirrors correctly for fitment with our Endurance fairing kit.
TYGA no: TYLY-0150
SKU: hon-10739 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, VFR400RR NC30Carb Service Kit A, 48 pieces, Honda VFR750R RC30
€97.64
Carb Service Kit A, 44 pieces, Honda VFR750R RC30
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC30
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone *
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A *
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A *
4x OR-040 Air Cut Seal, Material Viton 70A *
4x OR-041 Breather O Ring, Material: Viton 70A **
4x OR-016 Top Cap O-Ring, Material: Viton 70A *
4x OR-042 Float Bowl O-Ring, Material: Viton 70A *
4x OR-011 Overflow O-Ring, Material: Viton 70A **
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A **
4x CS-004 Choke Plunger Cap, Material: HNBR
Honda OEM parts numbers :
* No: 16010-MR7-014 → 16010-MR7-505 or 16010-MR7-691 → 16010-MR7-692 → 16010-MR7-505
** No: 16040-MR7-004
TYGA no: CK-Honda-RC30
SKU: alg-10349 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750R RC30Step kit replacement right side assy, KTM RC125/200/390
€40.16
Tyga Step Kit Replacement Right Side Hanger, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0048B
SKU: ktm-10088 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390Top Triple clamp CNC silver kit, Honda NSR150
€218.46
CNC machined top triple clamp with detachable ignition switch/lock holder for your NSR150SP.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-0051
SKU: hon-10282 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopEngine stand, Aprilia RS250/Suzuki RGV250
€81.09
Engine stand for Aprilia RS-250 and RGV250, (VJ21 and VJ22 models).
No more chasing the engine around the bench as this stand allows for dual positioning so that whichever cylinder is being serviced is always easily accessible from the top.
Also rather handy for draining oil on a loose engine, or just neat storage.
Uses standard engine rubbers in engine mounts and is held in the stand with the standard engine mount bolts.
Zinc plated steel for corrosion resistance and good looks. A necessity for any RGV250 or RS250 engine builder!
TYGA no: TYTO-0029
SKU: alg-10124 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Universal parts, Various parts, Various parts, Various partskey holder CNC silver, Honda NSR150
€121.39
Ignition Switch Holder, CNC Silver, NSR150SP
This is a removable ignition switch/lock holder for our NSR150SP top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps.
TYGA no: TYLY-0151
SKU: hon-10284 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, Shop