Gear 6th drive z=25 no.5, RGV250/RS250
€104.93
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Set full race system no silencer , Honda MSX125 GROM
€201.40
Set, Pipe, Full Race System, MSX125 Grom. No silencer. This product is fully compatible with the silencers used on our slip on systems for anyone looking to upgrade to a full system.
Designed for the MSX125 to maximise power, made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0043
SKU: MSX-10141 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopCarbon silencer guard (street) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0048
SKU: ktm-10153 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSet pipe Stainless full race system “round aluminium silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Round Aluminium Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long aluminium round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0139 and EXPS-0140 for similar system.
Tyga step replacement right side hanger , Yamaha R25/R3
€45.51
Tyga Step Kit Replacement Right Side Hanger, Yamaha R25/R3, Assy. Complete with mounting bolts.
TYGA no: STAH-0050
SKU: yam-10053 Categories: ALL products, CNC parts, Stock list, all models, Yamaha, YZF-R25/R3Racing step kit CNC silver, CBR250 2011 – CBR300 2014
€297.47
Racing Step Kit, (Fixed), CBR250R/CBR300R
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left hanger*. Kit is supplied with mounting hardware for stock Honda rear brake light switch.
Race shift possible by either modification to, or removal of the sprocket cover.
This step kit moves the peg position back 35 mm. and up 25 mm. from standard. For four way adjustable step kit, see STAA-0023. Note STAA-0023 is for race use only and requires removal of ABS system.
TYGA no: STAA-0013
SKU: hon-10186 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopStay, wiring harness, NC30/35
€6.55
Stay, wiring harness, NC30/35
This useful stay helps to support the wiring harnesses and cables where they thread along the front of the frame. Can be used with our various GP and RCV upper stays. It can really be used in any other similar application on other models too.
TYGA no: BPSY-0191
SKU: hon-10760 Categories: ALL products, By model, Honda, RVF400RR NC35, Universal parts, Various parts, Various parts, VFR400RR NC30Carbon swingarm cover, Honda RVF400
€150.00
This lightweight carbon cover fits over the stock swing arm on the NC35 RVF400. It is designed to protect against scratches and enhance your bike’s appearance. Fits in minutes.
TYGA no: BPCC-9018
SKU: hon-10362 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, Shop