Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Fuel tap extention RC36-2, RC36-2 RC30 style

20.66

(25.00 inc. VAT )

Steering Stopper, Honda VFR750R RC36 (94-97)

Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.

TYGA no: TYLY-0318

SKU: hon-11458 Categories: , , , , ,
Read more

Big bore kit 300cc wiseco, NSR250 MC18/MC21/MC28

2,264.37

(2,739.89 inc. VAT )

This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc pistons are replaced with high performance options.

In this case we have forged Wiseco pistons that are lighter and stronger than stock. They use Wiseco rings, clips and pins.

See below for performance details for TPER-0007.

Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.

Parts included in the NSR300 kit.

Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)

Rear Head x 1

Front Head x 1

Piston x 2

Ring set x 2

Piston Pin x 2

Piston Clip x 4

S/E Bearing x 2

Head gasket x 2

Cylinder gasket x 2

RC Valve cables x 4

Water hose x 1

Exhaust Manifold x 2 (to fit TYGA pipes)

Other information:

There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different

cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.

The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.

Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:

MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.

Temp: 29 C

Press: 1015mb

Hum: 65%

Alt: 30m

MJ – #182/#185

JN – Std./Std.

SJ – #38/#38

AS – 1.5 turns out

PwrJ – Std./Std.

Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.

This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.

At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.

Read more

Fork cap kit, Suzuki RGV250 Vj23

317.71

(384.43 inc. VAT )

After 20 years or so of hard use, many RGV’s damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any RGV250 VJ22 restoration and install exactly the same as the original parts.

The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.

TYGA no: TPER-0099

SKU: suz-10130 Categories: , , ,
Read more

Carbon silencer bracket “Gp style”, Suzuki RGV250 VJ22

85.80

(103.82 inc. VAT )

One of our most popular bodykits from last years.

This kit comprises of the parts shown in the picture which are also available separately.

Light and strong, update your RGV250 with these great parts.

* A clear screen is provided unless you specify tinted in the comment box at check out

This kit is supplied with all additional fasteners required to mount it to a stock VJ22

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

TYGA no: 001700KP/T

SKU: suz-10156 Categories: , , , , , ,
Read more

Axle slider kit (black) Kawasaki Ninja 400

56.33

(68.16 inc. VAT )

Axle slider kit (black) Kawasaki Ninja 400

TYGA no: TPER-0057

SKU: kaw-10156 Categories: , , , ,
Read more

Top Triple Clamp, CNC Silver, NC35 RVF400

196.92

(238.27 inc. VAT )

Top Triple Clamp, CNC Silver, NC35 RVF400

CNC machined TYGA top triple clamp with detachable key holder for your RVF400 NC35

Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.

Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.

This product can be bought as a set TYLY-0042 with detachable ignition switch holder.

TYGA no: TYLY-0042(p)

SKU: hon-10784 Categories: , , , , ,
Read more

Upper cowling stock shape painted RT, Honda RVF400 NC35

545.50

(660.06 inc. VAT )

Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings but indicator positions smoothed off. Should be used with BPFL-0103 (Painted RT)

TYGA no: BPFU-0029 (Painted RT)

SKU: hon-10519 Categories: , , , , , , ,
Read more

Exhaust Chamber, Left, Side By Side Type, Stainless Steel, MC18

443.15

(536.21 inc. VAT )

Bare replacement left side chamber for EXCS-0003

TYGA no: EXCB-0003L

SKU: hon-10884 Categories: , ,
Read more