Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Fairing set race stock shape, Honda NSR250 MC21

674.07

(815.62 inc. VAT )

This kit comprises of parts below.

Upper Fairing

Lower Fairing

Seat Fairing

Front Fender

Screen

The fairing is a race version of the stock shape with headlight and indicator holes filled in. The lower is in one piece for simple installation and removal.

Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!

This kit is supplied with clear screen. Please state if you would like a tinted screen or and we will be happy to change to suit. Same applies if you wish to substitute a different model front fender.

Please note that the fairings only weigh approx. 1kg for upper fairing panel and 1.5 for lower and 1.6 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg. You may want to consider two sets and save on shipping…

Delivered in white primer

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

TYGA no: BPFS-0112

SKU: hon-10356 Categories: , , , , , ,
Read more

Undertray street GRP GP-T, Honda NSR250 MC21/MC28

75.27

(91.08 inc. VAT )

Undertray, Street, (GRP), NSR250 GP-T

This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings

Also to be used with BPFX-9133 Registration Plate Holder GP-T.

Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28

BPFX-9033 Undertray Street GRP

BPCX-9033 Undertray Street Carbon

BPFX-9333 Undertray Race GRP

BPCX-9333 Undertray Race Carbon

Read more

Carb Service Kit A, 48 pieces, Honda VFR750R RC30

97.64

(118.14 inc. VAT )

Carb Service Kit A, 44 pieces, Honda VFR750R RC30

LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC30
Made from long lasting, ethanol resistant elastomers and Viton®

Consist of the following items:

4x FB-025 Float Bowl Ring, Material: Flourosilicone *
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A *
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A *
4x OR-040 Air Cut Seal, Material Viton 70A *
4x OR-041 Breather O Ring, Material: Viton 70A **
4x OR-016 Top Cap O-Ring, Material: Viton 70A *
4x OR-042 Float Bowl O-Ring, Material: Viton 70A *
4x OR-011 Overflow O-Ring, Material: Viton 70A **
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A **
4x CS-004 Choke Plunger Cap, Material: HNBR
Honda OEM parts numbers :

* No: 16010-MR7-014 → 16010-MR7-505 or 16010-MR7-691 → 16010-MR7-692 → 16010-MR7-505

** No: 16040-MR7-004

TYGA no: CK-Honda-RC30

SKU: alg-10349 Categories: , , ,
Read more

Carbon end cap YZ250 silencer

37.18

(44.99 inc. VAT )

Tail Pipe, Stainless Steel, YZ250.

This link pipe is used in conjunction with the silencer, and is specific to the Yamaha YZ250

This product is compatible with EXCB-0032 and EXSL-0050 which together make up complete exhaust system EXTS-0001

TYGA no: EXCC-0007

SKU: alg-10142 Categories: , , , , , ,
Read more

Water pump shaft/gear, Honda NSR250 MC28

255.37

(309.00 inc. VAT )

Water Pump Shaft/Gear, MC28

High quality hard anodized aluminium gear, on precision ground shaft.

Manufactured by T2 Racing in Japan.

Direct replacement for the standard plastic shaft/gear which is prone to cracking and causing catastrophic failure.

The shaft and gear can be disassembled should any parts ever need replacing.

Note that this part is for MC28 only. For MC18 and MC21 please see TPER-5003

TYGA no: TPER-5004

SKU: hon-10623 Categories: , , , , , , ,
Read more

Carbon air duct standard, Aprilia RS250

90.32

(109.29 inc. VAT )

This carbon air duct is the same shape as the stock Aprilia air duct used on the later Mark II RS250 (1998-2008) Suitable for stock bodywork only.

It adds bling factor and weighs only 120 grams!

Update your bike with this great carbon product, direct replacement of the original part

Not suitable for TYGA bodywork kits (BPFS-0100 and BPFS-0101).

TYGA no: BPCX-9430

SKU: apr-10057 Categories: , , , , ,
Read more

Triple clamp set CNC silver, Honda NSR150

142.52

(172.45 inc. VAT )

CNC machined TYGA top triple clamp for race use ( not including detachable key holder) for your NSR150SP.

Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.

Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.

The detachable ignition switch/lock holder which is positioned to allow use of the steering lock can be bought separately or order as triple clamp set TYLY-0051.

TYGA no: TYLY-0051p

SKU: hon-10283 Categories: , , , ,
Read more

Triple clamp set CNC black, Honda NSR250 -> RVF400 fork

673.59

(815.04 inc. VAT )

Triple Clamp Set, CNC Black, NSR250 MC18 (1988/89) To Fit RVF400 Forks

CNC machined TYGA triple clamp set for the MC18 to take NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-1247

SKU: hon-10703 Categories: , , , , ,
Read more