Silencer carbon/carbon cap with carbon cover, Yamaha R25 / R3
€333.51
Set, Pipe, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3
Hand assembled with carbon sleeve. Precision made CNC machined mount cap, with sleek carbon end cap.
This is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhause cover and fit the TYGA silencer and exhaust cover.
This silencer looks great, significantly reduces weight without adding any noticeable volume.
(May not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.
TYGA no: EXPS-0060
SKU: yam-10049 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Shop, Yamaha, YZF-R25/R3Silencer oval carbon, Honda CBR500
€440.34
Silencer, Carbon, Oval/Carbon End Cap, 50.8 X 380 mm., CNC/Spring Mount, No Fittings.
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 122mm x 90mm(diameter of stainless tube) L. 380mm Suitable for 300/500 cc medium capacity four stroke motorcycles.
TYGA no: EXSL-0043(p)
SKU: hon-10343 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, Shop, SilencersSeat cowling hump TYGA, Suzuki RGV250 VJ21
€198.72
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021R and L. for installation.
TYGA no: BPFT-9021HÂ Â
SKU: suz-10101 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Front fork adjuster 14mm
€32.91
Front fork Pre-load adjuster. suitable for adjuster with 14 mm oval type fitment, for example:
Make Model from year to year
Honda NSR250 1988 1997
Honda VFR400R 1989 1993
Honda CB 1300 2003 2009
Honda CB 1300 S 2005 2013
Honda CBR 600 F 2001 2007
Honda CBR 600 F Sport 2001 2002
Honda CBR 600 RR 2003 2004
Honda CBR 900 RR Fireblade 1992 1999
Honda Hornet 900 2002 2005
Honda VTR 1000 F Firestorm 1997 2006
Suzuki GSX-R 600 1997 2003
Triumph Daytona 1200 1993 1997
Triumph Daytona 900 1993 1996
Triumph Daytona 955i 1999 2006
Triumph Daytona T595 (955i) 1997 1998
Triumph Speed Triple 2003 2004
Triumph TT 600 2000 2003
TYGA no: TYLY-1110 - TYLY-4110
SKU: alg-10149 - alg-10151 Categories: ALL products, CBR600RR 2003- 4, CBR900RR 1992- 95, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon seat set race, Aprilia RS250
€1,059.04
Due to popular demand, our GP seat cowling kit is now available in carbon race version. These panels are both lighter and stronger than GRP. Finshed in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown below which are also available separately.
*Please note, does not include front fairing kit which can be ordered, Graphics shown in photos are not included.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS-250
If you have left and right exiting chambers (side by side) you will need to add 1 X exhaust stay to your order (Only one supplied in kit for twin right exiting chambers)
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fot the lower TYGA cowling.
TYGA no: BPFS-0168
SKU: apr-10087 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopSet, Pipe, Full Race System, Ninja 300R, Moto Maggot Silencer
€519.40
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Moto Maggot Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted Moto Maggot silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Moto Maggot silencer EXSL-9213
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0095
SKU: kaw-10067 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Passenger seat cover primer, Honda MSX125 GROM
€137.59
moet nog 502
TYGA no: BPFX-7128
SKU: MSX-10329 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopBracket rear brake CNC black 84mm Brembo, Honda NSR250 MC21
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, black, MC21.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1084)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1084
SKU: hon-10406 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, Shop