Meter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0079
BPFS-0092
See table for application of meter stay extensions with our body kits:
Top Triple clamp CNC silver, Suzuki RGV 250 VJ23kit
€257.32
CNC machined top triple clamp with detachable ignition switch/lock holder for your RGV250 VJ23.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
Silencer carbon round with carbon cap”slip on”, ZXR250
€426.36
TYGA Bike Dust Cover, Lime Green/Black, NINJA
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Carbon front fender HRC style, Honda SP1/SP2
€209.33
This fender has been molded off a genuine factory HRC front fender as used by Colin Edwards etc. High quality carbon fibre gloss finish. This fender is designed to work with factory front end but can be used with stock SP1/SP2 front end.
Please note that the rear mounting holes need to be drilled by the customer. This is because the HRC front end uses a different mounting point to the stock SP1/SP2 front end.
Update your bike with this great carbon product.
Carbon sprocket cover, Aprilia RS250
€115.38
Sprocket Cover (Carbon), Aprilia RS-250
Attractive alternative to the stock sprocket cover and uses original mounting bolts.
TYGA no: BPCC-7217
SKU: apr-10075 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopCarbon exhaust chamber guard, KTM SX250/SX300
€160.51
Exhaust Chamber Guard (Carbon), KTM250/300 Off-road
This tough carbon exhaust guard is designed to fit snuggly over the stock KTM250/300 off-road models from 2005 to 2015. Constructed using high strength epoxy resins and with a layer of kevlar on the inside for extra protection, this guard is the best on the market.
Fits in minutes
Supplied with mounting hardware as shown in the photo
Front Fork Preload Adjusters blue/red (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Red/Blue
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in red and blue anodised finish, (see TYLY-1097 and TYLY-2097 for other colour versions too) these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0097
SKU: MSX-10137 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsBattery Box Cover , Race, Carbon Clearcoated, KTM RC390 WSS300
€146.50
Battery Box Cover, Race, Carbon Clearcoated, KTM RC390 WSS300
Replacement Battery Box Cover. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFX-7631B (GRP)
BPCX-7631B (Carbon Unpolished)