Chain slider, RS250 NX5
€44.99
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Tyga Step Kit Replacement Left Side Hanger, MSX125 Grom, Black, Assy.
€90.48
Replacement left hanger for your MSX125 Grom TYGA Step Kit, Black. Complete with mounting hardware and bushes.
Racing step kit CNC silver, CBR250RR MC22
€301.92
Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium. Uses carbon heel guard on left side hanger (the right side carbon brake/heelguard shown in the pictures is an optional extra and can be ordered with your step kit, part number BPCC-9002)
This step kit moves the peg position back 15 mm. and up 20 mm. from standard. Pitch of hanger to frame mounting holes is 106.4 mm. on left and 103.4 mm on right.
Bracket rear brake CNC black 84mm Brembo, Honda NSR250 MC21
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, black, MC21.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1084)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1084
SKU: hon-10406 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopFront fender grp, stock shape painted NC23 – NC29 – NC30
€123.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFF-0005rosswhite
SKU: hon-11398 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC23, CBR400RR NC29, Honda, Shop, VFR400RR NC30Carbon hugger, Ducati monster 696/795
€159.41
Hugger, (Carbon), Ducati Monster, 696, 795
Carbon upper cowling GP-T, Honda NSR250 MC21/MC28
€590.40
Upper Cowling Street (Carbon), NSR250, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NSR250 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPCL-9033 and other mounting hardware it comprises set BPFS-0138.
This cowling is supplied with a plastic bung to mount to the meter stay.
See also BPFU-9033 for GRP (Glass reinforced plastic) version of this product.
Compatible parts:
BPCL-9033 Lower Cowling
TYLY-0121 Upper Stay
BPLT-0027 Headlight
BPSY-0155 Fairing Adaptor Stay
BPSY-0143A Side Stay Kit
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
TYGA no: BPCU-9033
SKU: hon-10542 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopSide cover left flat black, Honda MSX125 GROM
€39.31
Side cover flat black, OEM Honda part
TYGA no: 83540-K26-900ZF
SKU: MSX-10322 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop