O- ring for exhaust, RGV250 / RS250
€5.97
Replacement O rings for the TYGA exhaust manifold used with the TYGA expansion chamber.
Remember to order four of these items to service both expansion chambers.
This is a replacement part. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA systems:
EXCS-0007
EXCS-0008
EXCS-0009
EXCS-0010
EXCS-0011
EXCS-0014
EXCS-0016
EXCS-0018
TYGA no: EXOR-0001
SKU: alg-10024 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, RGV250 VJ21, RGV250 VJ22, RS250, ShopBattery Box cover, KTM RC125/200/390
€78.09
Battery Box Cover, (GRP), KTM RC125, RC200, RC250, RC390
This component replaces the nasty plastic item, adds class to your ride and is an easy installation.
This product can also be ordered with tank cover BPFX-7431A to save on shipping costs see BPFX-7431
TYGA no: BPFX-7431B
SKU: ktm-10132 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 390, ShopFrame In-fill panels (pair) GRP, Honda VFR400 NC30
€81.92
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFC-7417
SKU: hon-11295 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Lower Cowling, Race, Carbon Unpolished, KTM RC390 WSS300
€382.54
Lower Cowling, Race, Carbon Unpolished KTM RC390 WSS300
Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFL-7531 (GRP)
BPCL-7531 (Carbon Clearcoated)
Silencer, Carbon, Two Stroke, 70mm, Assy
€151.18
Silencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
This high quality lightweight silencer is made from CNC machine entry and pressed stainless steel exit cap joined by a carbon/Kevlar fiber tube. It is designed very similar to the ones we make for the NSR500V but is a direct fitment for our 250V style chambers and provides the same power characteristics as our other two stroke silencers. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-0047) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
Tyga Performance Two Stroke chambers sets EXCS-0047. (We will be adding more to this list as we get the chance to install with other previous TYGA exhaust systems, Feel free to request advice by email about suitable applications) Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0083 carbon
TYGA no: EXSL-0083
SKU: hon-11048 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28Front fender (GRP), HRC NSR250 replica
€75.27
Front Fender, GRP, HRC NSR250 replica
Front Fender, Factory HRC NSR250 Racer Style. This front fender is designed to fit HRC factory NSR250 forks but could possibly made to fit other models with suitable mounting hardware. It is similar in styling to the front fenders used by factory riders such as Cadalora, Biaggi, Ukawa, Okada etc. in the years 1992-1995. The reason for this fender being in our line up is we were lucky enough to source some factory forks and needed a fender to go with them and wanted something as close the original as possible and designed it from photos and memory so while similar, it is not an exact replica. In any case if you look at the fenders used by HRC at that time, you can see that there are slight differences between years and bikes.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc.
TYGA no: BPFF-0007
SKU: hon-10942 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopUnder Cowl, Belly Exhaust Type, (GRP), White, MSX125
€196.87
Under Cowl, Belly Exhaust Type, (GRP), White, MSX125
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<a href= {{media url= wysiwyg/46-undercowl-bpfl-cl-7328-online-e5eb2cb5.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFL-7328 W
SKU: MSX-10367 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopIgnition Switch Holder, CNC Black, KTM, RC Series
€121.39
Ignition Switch Holder, CNC Black, KTM, RC Series
This is a removable ignition switch/lock holder for our KTM RC series top triple clamps. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1073.
Suitable for the following models:
KTM RC125
KTM RC200
KTM RC250
KTM RC390
TYGA no: TYLY-1173
SKU: ktm-10111 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all models