Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Lock assy, RC36-2 RC30 style

12.00

(14.52 inc. VAT )

Steering Stopper, Honda VFR750R RC36 (94-97)

Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.

TYGA no: TYPP-0036

SKU: hon-11472 Categories: , , , , , ,
Read more

Triple Clamp Set, CNC Silver, NC35 Forks to fit MC28

588.29

(711.83 inc. VAT )

CNC machined TYGA triple clamp set for the MC28 to take NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-0741

SKU: hon-10786 Categories: , , , ,
Read more

VHM cylinder head (2 pieces), Yamaha TZ250 ’03

493.12

(596.68 inc. VAT )

VHM cylinder head (2 pieces), Yamaha TZ250 >’03 (alg-10172)VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:2x cylinder head2x standard insert (12.0cc)This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl nog 1

TYGA no: AA33065        

SKU: alg-10172 Categories: , , ,
Read more

Carbon chain guard, KTM RC125/RC200/RC390 2022-

141.35

(171.03 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: BPCX-7131B

SKU: ktm-10207 Categories: , , , , ,
Read more

Carbon Rear hugger, Aprilia RS250

188.86

(228.52 inc. VAT )

This is a stock shaped hugger complete with mounting holes pre drilled for ease of fitment.

Weighs a fraction of the stock one at approx. 250g.

Let your bike stand out from the crowd with this beautiful carbon fibre product.

TYGA no: BPCH-9007

SKU: apr-10022 Categories: , , , , ,
Read more

Carbon tank filler cap cover cover, Suzuki RGV 250

34.06

(41.21 inc. VAT )

Carbon Tank Filler cap Cover. Fits Suzuki RGV250, and other models.

TYGA no: BPCC-0010

SKU: suz-10003 Categories: , , , , , , , ,
Read more

Chain slider , Honda RS250 NX5

57.13

(69.13 inc. VAT )

Replaces Honda/HRC part number 52170-NX5-000, fits top and bottom, for complete swingarm please order 2 pcs.

TYGA no: TYLY-0140

SKU: hon-10685 Categories: , , , , , , ,
Read more

Decibel killer silencer stainless, moto maggot

29.15

(35.27 inc. VAT )

Spacer side stand, VFR750F gen 4, 94-97

Spacer, Side Stand, VFR750F Gen 4, ’94-’97

For use with:

EXPS-0119 Set, Pipe, Full Race System, VFR70R Gen.4, ’94-’97, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer

TYGA no: EXDK-0007

SKU: hon-11035 Categories: , , , , ,
Read more