Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

TYGA / Kitaco Power up kit maggot , Honda MSX125 GROM

632.24

(765.01 inc. VAT )

TYGA/KITACO Power Up Kit, Maggot Type

This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.

Parts

This product consists of the components shown below, namely:

EXPS-0042 Set, Pipe, Full Race System, MSX125 Grom, Mot Maggot

KIT-300-1432010 KITACO Type 2 Camshaft

KIT-763-1432010 KITACO i-Map. Fuel Injection Controller

Option:

KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.

For those who want a Type 1 camshaft, please put this in the commentbox at check out.

Description:

Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.

Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!

The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html

The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:

i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html

Read more

TYGA bike dust cover Red Honda wing silver

65.05

(78.71 inc. VAT )

TYGA Bike Dust Cover, Blue, Rothmans Honda

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Read more

Lower cowling stock shape painted RT, Honda RVF400 NC35

360.85

(436.63 inc. VAT )

Street one piece lower cowling with open bottom as stock. Painted in the RT (1996-2000) colour scheme to match the rest of your bike. Note however that this should be used together with BPFU-1029 (Painted RT)

TYGA no: BPFL-0103 (Painted RT)

SKU: hon-10518 Categories: , , , , , , ,
Read more

Rear sprocket aluminium gold, KTM Duke 125/200

67.41

(81.57 inc. VAT )

Upgrade your bike with TYGA Sprockets.

Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.

TYGA no: TYSR-0113-38 - TYSR-0113-46

SKU: ktm-10009 - ktm-10017 Categories: , , , , ,
Read more

Belly pan (GRP) White, Honda MSX125 GROM

225.09

(272.36 inc. VAT )

Belly Pan, (GRP), MSX125, painted Himalaya pearl white to match your bike. Bling up your grom with this cool component.

Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.

High quality mounting hardware provided and easy to install.

We also offer the same product with carbon, see BPCL-7228 shown on bike in the photos.

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>

TYGA no:  BPFL-7128 W

SKU: MSX-10189 Categories: , , , , , ,
Read more

Set full race system under belly with long stainless silencer with carbon cap, Honda MSX125SF GROM

480.85

(581.83 inc. VAT )

Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Long

This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (DB killer included)

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.

A useful increase in peak power and further gains could probably be had with remapping etc.

Similar Products:

Please also see:

EXPS-0068 Stainless, Underbelly, with short silencer

&lt;iframe width= 560 height= 315 src= https://www.youtube.com/embed/mSTQKSWArE0 frameborder= 0 allowfullscreen&gt;&lt;/iframe&gt;

TYGA no: EXPS-0064

SKU: MSX-10349 Categories: , , , , , , , ,
Read more

Silencer mesh/slash cut, slip on with carbon cover, Yamaha R25/R3

209.75

(253.80 inc. VAT )

Set, Pipe, Slip On, Mesh, Slash Cut, Yamaha R25/R3

Hand welded from stainless steel, this is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhaust cover and fit the TYGA silencer and exhaust cover.

This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).

Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.

TYGA no: EXPS-0071

SKU: yam-10058 Categories: , , , ,
Read more

Kit upper cowling grp street, KTM RC125/200/390

843.61

(1,020.77 inc. VAT )

Kit, Upper Cowling, Street, (GRP) KTM RC125/200/250/390

This TYGA designed upper cowling kit replaces the ugly stock set up with attractive sleek styling.

As well as a cosmetic enhancement, this kit incorporates modern LED headlights with two units on dip, two on full beam and two side lights to give excellent illumination at night and visibility of your bike to other road users during the day.

In addition, the design allows for wider spacing of the rear view mirrors for great safety and lighter weight for better performance.

The components are carefully designed to reduce weight with the subframe being made from lightweight tubular aluminium alloy and the main fairing made from either carbon fiber or glass reinforced plastic for strength and lightweight.

Note, at the moment we don’t have this part in stock. The sets are now in production and will take about 5 weeks when we deliver the first sets.

That’s why we now offer it for pre order price, you get an extra discount.

Read more