Steering stopper MiniRacerXtreme, Honda MSX125 GROM
€17.45
Steering Stopper, MSX125 Grom
This steering stopper is designed specifically for our MRX project to limit steering movement to the confines of the body kit. However, this can be used separately with the standard set up for anyone wanting to limit steering movement. Easy to install and fits in minutes.
Fitting Instructions:
Remove the front brake stay and the horn wiring stay from the lower triple clamp temporarily. Install the steering stopper as shown in the photo Reinstall the stays in the standard position holding the steering stopper in place. Test to make sure the steering operates smoothly and no wires, cables or hoses are getting pinched or rubbing on anything they shouldn’t do.
TYGA no: BPSY-0122
SKU: MSX-10270 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopRear axle Wheel, MSX/ Monkey
€20.41
Rear axle Wheel, MSX/ Monkey
TYGA no: 42301-K26-900
SKU: msx-10252 Categories: ALL products, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, OEM parts, OEM parts, Shop, Various parts, Various parts, Various partsCarb Service Kit A, 10 pieces, Honda NT650
€24.09
Carb Service Kit A, 20 pieces, Honda NT650
LiteTek Carburettor Seal Kit to suit: Honda NT650 (Hawk 650)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-030 Float Bowl Seal, Material: Flourosilicone (Part of assembly 16010-MR1-691)
2x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of assembly 16010-MR1-691
2x WS-001 Pilot Screw Washer, Material: Stainless Steel (Part of assembly 16016-MAH-670)
2x OR-009 Oval Ring, Material: Viton 70A (Part of assembly 16010-MR1-691
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of assembly 16010-MR1-691
Racing step kit CNC silver, Honda NSR250 MC18
€384.49
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine- made step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners. One of the many advantages over the standard footrest assembly is the ability to reverse the shift pattern without removal of the side stand, so giving the ‘racer’ set-up, on the street. Kit includes gear selector link rod.
Now includes rear brake light provision.
Peg position is 20mm. up and 10mm. back. Pitch of hanger frame mounting holes is 78 mm. on left and 71.5 mm on right.
Reverse schifting is possible with this race step kit.
TYGA no: STAA-0016
SKU: hon-10366 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC18, ShopBracket rear brake CNC silver 84mm Brembo, Suzuki RGV250 VJ22
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, VJ22 and VJ23.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1090)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0090
SKU: suz-10082 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiFuel Tank, GRP, HONDA VFR750R RC30
€977.66
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Side cover right black, Honda MSX125 GROM
€39.31
Side cover right black, Honda MSX125 GROM (msx-10019)
OEM Honda part
TYGA no: 83530-K26-900ZD
SKU: MSX-10019 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon tank cover, Yamaha R1 2007-8
€224.38
Tank Cover (Carbon) 2007-8 Yamaha R1.
Let your bike stand our from the crowd.