Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

TYGA bike dust cover Red/Black NSR

63.10

(76.35 inc. VAT )

TYGA Bike Dust Cover, Red/Black Honda NSR

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

See also TMER-0068 (TYGA Bike Dust Cover Blue/Black Honda NSR)

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.

Read more

Set exhaust without header, race system without silencers

409.54

(495.54 inc. VAT )

This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.

Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.

** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.

For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.

Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.

TYGA no: EXPS-0093

SKU: ktm-10094 Categories: , , , , , ,
Read more

Set exhaust pipe with carbon silencer, Yamaha R25/R3

917.05

(1,109.63 inc. VAT )

Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, Round Carbon Silencer

This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!

Compatiblity

This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.

No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.

Please also see EXPS-0072, EXPS-0074 and EXPS-0075 for similar system.

Performance and Dynograph

Please refer to dynographs

A) All Standard.

The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.

B) Airfilter/Airbox modification.

The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.

TYGA no: EXPS-0073

SKU: yam-10060 Categories: , , , ,
Read more

** USED ** Fairing set front fairing and rear seat, track

660.00

(798.60 inc. VAT )

** USED ** wire harness Suzuki RGV250 VJ22

GERMAN type, different solenoid system.

*** no returns on used parts ***

Read more

Carbon Lower cowling, stock shape, NXA RS250R (2001- ’08)

524.11

(634.17 inc. VAT )

Airbox, Carbon/Kevlar, NSR250 MC21/MC28

This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.

Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007

TYGA no: BPCL-9049

SKU: hon-11386 Categories: , ,
Read more

Tank cover set, CBR250RR MC22

239.46

(289.75 inc. VAT )

This product is a set of two tank covers which are designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example. They use the original mounting points front and rear.

We recommend using a smear of silicone sealant where the two halves meet and round the filler cap for a secure and watertight seal

TYGA no: BPFX-9225

SKU: hon-10213 Categories: , , , ,
Read more

Upper cowling race ,KTM RC125/RC200/RC390

150.56

(182.18 inc. VAT )

Upper Cowling, Race (GRP), KTM RC125/200/390

This lightweight GRP upper cowling replaces both the heavy and brittle clear front cowling and the black plastic part underneath to save weight, add strength and make for easy assembly. A must for anyone racing the RC390!

Note this product requires windscreen model SCRE-0163 or SCRE-0164 to complete the race conversion

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

Read more

Seat Cowling, (GRP), MC18, GP-T

379.51

(459.21 inc. VAT )

Seat Cowling, (GRP), MC18, GP-T

We make three versions of our NSR250. MC18, GP-T seat cowling for use for the MC18 in different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC18, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,

BPFS-0160 (GRP,Street)

BPFS-0161(GRP Race)

BPFS-0162 (Carbon,Street)

The advantages of this seat cowling over stock include:

– use with rest of seat cowling kit, much lighter than stock

– new design allows for integrated LED Tail light ( BPLT-0009) for flush fitment and new lighter registration/license plate holder ( BPFX-9133). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment

Tyga Performance Compatible Parts for this Product:

This product is compatible with:

BPFX-9035, BPFX-9335, BPCX-9035 and BPCX-9335 Undertray, MC18, GP-T

TYLY-0183 Subframe, MC18, GP-T

BPFX-9235 Seat Support, MC18, GP-T

BPSP-0006 Seat Pad, GP-T

BPAC-0001 Rear Brake Reservoir Kit,

BPLT-0009 LED Taillight

BPFX-9133 Registration Plate Holder GP-T

TYGA no: BPFT-9035

SKU: hon-10730 Categories: , , , ,
Read more