Seal, Waterpump, MC21/28
€4.05
Seal, Waterpump, MC21/28
TYGA no: 10x20x5
SKU: hon-11082 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Carbon rear hugger, KTM RC125/RC200/RC390 2022-
€113.63
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCH-7031B
SKU: ktm-10206 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelskey holder CNC silver, Suzuki RGV 250
€121.39
Ignition Switch Holder, CNC Silver, Suzuki RGV250 VJ22
This is a removable ignition switch/lock holder for our Suzuki RGV250 VJ22 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1046.
TYGA no: TYLY-0146
SKU: suz-10059 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiKit, Complete Body Set, Stock Shape, Solo Seat, with Fuel Tank, NC30, Painted Type 1
€2,957.86
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0222
SKU: hon-11399 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Headlight GP-T,
€369.67
Headlight, GP-T, Assy.
This stylish headlight, designed by, and unique to TYGA Performance consists of a total of 4 LED light units arranged in two pairs with 2 on dip and all four illuminated on high beam. LEDs use very little power and draw a lot less current than the stock headlight unit. This TYGA headlight will make your presence known to other road users and emit a bright blue/white light.
Note this product does not comply to any road legal regulations and it is not recommended for high speed riding at night on unlit roads.
Compatible Parts:
Tyga Upper Cowling BPFU-9033, BPCU-9033, BPFU-9034 and BPCU-9034
TYGA no: BPLT-0027A
SKU: hon-10538 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Suzuki RGV250, VFR400RR NC30Koppelingdeksel Takegawa voor Honda MSX125
€442.17 €373.83
Koppelingdeksel Takegawa voor Honda MSX125
High performance with high quality and durability.
Specially designed to have quick access to the clutch.
Also room for a thermostat and in/outlet for a oil cooler.
TYGA no: 02-01-0150
SKU: msx-10376 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020Bodywork Set 2, GRP, RC36-2 RC30 Style, Race
€3,181.20
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFS-0239
SKU: hon-11481 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSeat Cowling (GRP), NX5 RS250R (early model style)
€290.93
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Please see our range of NX5 bodywork section for sets that use this product and similar items.
TYGA no: BPFT-9236
SKU: hon-10941 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop