Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Stay maggot silencer, Honda MSX125SF GROM

21.25

(25.71 inc. VAT )

Stay, Maggot Silencer, MSX125SF, High Level Exhaust

This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhaust:

EXPS-0065 Set, Pipe, Full Race system, MSX125SF Grom, Moto Maggot

Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0177 which has the mounting holes further toward the rear and is used with our oval silencer full race system EXPS-0066 and EXPS-0067.

TYGA no: BPSY-0175

SKU: MSX-10342 Categories: , , , ,
Read more

Carbon frameshields (pair), Suzuki GSX 1000 K5-K6

282.92

(342.33 inc. VAT )

Frame shields

Direct replacement of the original Suzuki part

Let your bike stand out from the crowd with this beautiful carbon fibre product.

PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.

TYGA no: BPCX-7203

SKU: suz-10035 Categories: , , , ,
Read more

Carbon Swing Arm Cover (pair), Aprilia RS250

269.08

(325.59 inc. VAT )

Carbon Swing Arm Cover (pair), Aprilia RS250

Very popular product, many swing arms have scratches, so with this beautiful carbon product you get rid of the scratches and also get that GP look.

Our products are of real carbon and have a perfect finish and fitting.

TYGA no: BPCC-9112

SKU: apr-10039 Categories: , , , , ,
Read more

Carbon rear hugger, Honda VTR1000 Sp2

191.84

(232.13 inc. VAT )

This stylish lightweight carbon hugger fits on the SP2 swing arm preventing rain and road dirt from reaching the rear suspension which can cause damage and corrosion. The hugger fits using only existing mounting points on the stock swing arm.

Please note that due to manufacturing tolerances between individual bikes, there is some difference in the exact mounting location from one bike to another. We recommend the use of silicone sealant as well as the fasteners provided to ensure a secure fit and prevention of damage to surface of swing arm.

This product is not suitable for the SP1 which uses a different shaped swing arm. See hugger BPCH-7120 for SP1 application

Beautiful, perfect fitment and give your bike that HRC look.

TYGA no: BPCH-7020

SKU: hon-10162 Categories: , , , ,
Read more

Carbon set, rear hugger and chain guard, KTM RC125/200/390

235.46

(284.91 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: BPFS-0226

SKU: ktm-10205 Categories: , , , , ,
Read more

Carbon Swing arm cover, Honda VFR400 NC30

150.00

(181.50 inc. VAT )

This lightweight carbon cover fits over the stock swing arm on the NC30 VFR400R.

Very popular product, many swing arms have scratches, so with this beautiful carbon product you get rid of the scratches and also get that GP look.

Update your bike with this great carbon product, direct replacement of the original part

TYGA no: BPCC-9019

SKU: hon-10312 Categories: , , , , ,
Read more

Handlebar set silver, Kawasaki ZXR250/300 2008 –

247.58

(299.57 inc. VAT )

Handlebar Set, Silver, Ninja 250R, 300R. Fits all models from 2008 to present.

This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well allowing more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.

The handlebars allow for adjustment rotating around the fork leg for personal preference by use of two shims supplied, and are totally independant of the front fork allowing for stock or alternative fork leg position in triple clamps as well as installation of pre-load adjusters.

TYGA no: TYLY-0869

SKU: kaw-10034 Categories: , , , ,
Read more

Racing step kit CNC silver, Yamaha R25 / R3

344.44

(416.77 inc. VAT )

Racing Step Kit, Yamaha R25 & R3

Designed in-house by TYGA Performance using CAD/CAM software, these CNC machine-made step kits are manufactured from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right side hanger.

This step kit moves the peg position back 35 mm. and up 25 mm. from standard. Pitch of hanger frame mounting holes is 65mm.

Note: we supply a replacement rear brake line for fitment with this kit for the non-ABS model R25 and R3.

Reverse schifting is possible with this race step kit.

TYGA no: STAA-0025

SKU: yam-10043 Categories: , , , ,
Read more