Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Passenger Seat Cover GRP, NC30, Stock Shape, Assy, Painted Type 1

145.40

(175.93 inc. VAT )

Fuel Tank, Carbon, VFR400R NC30

Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).

Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).

Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.

Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.

TYGA no: BPFX-0021type1

SKU: hon-11409 Categories: , , , , ,
Read more

Seat cowling (grp) stock shape race single, Honda VFR400 NC30

242.66

(293.62 inc. VAT )

Seat Cowling (GRP), NC30, Single, Stock Shape, Race

Stock shape seat cowling with taillight holes. Single seat, direct replacement for stock NC30 seat cowling in the same shape but with RC30 style single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.

Please note:

for similar product but with taillight holes, please order BPFT-0121.

for similar product but with passenger seat pad area open, same as stock, and tail light holes order BPFT-0021

Compatible Parts:

All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

TYGA no: BPFT-0221

SKU: hon-10492 Categories: , , , , , ,
Read more

Gear Shift Lever, Ninja 250R 2013 -18

36.70

(44.41 inc. VAT )

Gear Shift Lever, Ninja 250R 2013 -18

TYGA no: 13242-0050

SKU: kaw-10159 Categories: , , , ,
Read more

Instrument holder, Ninja 400

28.09

(33.99 inc. VAT )

Instrument Holder, Ninja 400

Replacement instrument holder Ninja 400 suitable for TYGA race bodywork BPFS-0175

TYGA no: TYLY-0201

SKU: kaw-10139 Categories: , , ,
Read more

Carbon chain guard, KTM RC125/RC200/RC390 2022-

141.35

(171.03 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: BPCX-7131B

SKU: ktm-10207 Categories: , , , , ,
Read more

Cowling Right white, Honda MSX125 GROM

23.35

(28.25 inc. VAT )

Cowling Right white, Honda MSX125 GROM (msx-10013)

OEM Honda part

TYGA no: 77215-K26-900ZB

SKU: MSX-10013 Categories: , , , ,
Read more

Carbon fuel tank, Honda NSR250 MC28

1,444.49

(1,747.83 inc. VAT )

Fuel Tank, Carbon, NSR250, MC28

Top quality reproduction of the steel MC28 fuel tank in carbon fiber. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).

Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).

Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.

Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.

This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:

BPFS-0003

BPFS-0004

BPFS-0032

BPFS-0059

BPFS-0060

BPFS-0129

BPFS-0130

BPFS-0131

TYGA no: BPCG-0001

SKU: hon-10682 Categories: , , , , , , ,
Read more

Meter Stay Extension

12.29

(14.87 inc. VAT )

Replacement meter stay extension nylon shaft. Suitable for the following models:

BPFS-0013

BPFS-0014

BPFS-0020

BPFS-0115

BPFS-0116

BPFS-0119

See table for application of meter stay extensions with our body kits:

TYGA no: BPSY-0033

SKU: hon-10769 Categories: ,
Read more