Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Stay, taillight, Honda VFR400 NC30

8.94

(10.82 inc. VAT )

Fuel Tank, Carbon, VFR400R NC30

Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).

Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).

Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.

Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.

TYGA no: BPSY-0326

SKU: hon-11414-1 Categories: , , , , , ,
Read more

Carbon Headlight cover, Honda MSX125 GROM

191.80

(232.08 inc. VAT )

Carbon headlight cowling, let your bike stand out from the crowd

TYGA no: BPCU-7028

SKU: MSX-10116 Categories: , , , ,
Read more

Front sprocket 14T, Honda MSX125 GROM

7.37

(8.92 inc. VAT )

14T steel front sprocket for Honda MSX125. Made by JT. To fit standard #420 chain.

TYGA no: JTA-H-WA-420-F-14T

SKU: MSX-10085 Categories: , , , , , , ,
Read more

Carbon front fender stock shape, Honda RS250R NXA

227.52

(275.30 inc. VAT )

Airbox, Carbon/Kevlar, NSR250 MC21/MC28

This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.

Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007

TYGA no: BPFC-9049

SKU: hon-11389 Categories: , ,
Read more

Set full race system under belly with long stainless silencer with carbon cap, Honda MSX125SF GROM

480.85

(581.83 inc. VAT )

Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Long

This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (DB killer included)

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.

A useful increase in peak power and further gains could probably be had with remapping etc.

Similar Products:

Please also see:

EXPS-0068 Stainless, Underbelly, with short silencer

<iframe width= 560 height= 315 src= https://www.youtube.com/embed/mSTQKSWArE0 frameborder= 0 allowfullscreen></iframe>

TYGA no: EXPS-0064

SKU: MSX-10349 Categories: , , , , , , , ,
Read more

Top Triple clamp CNC silver , Honda NSR250 MC18/MC21/MC28

177.34

(214.58 inc. VAT )

Top Triple Clamp, Race, CNC Silver, NSR250

CNC machined top triple clamp for your NSR250. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-0141).

Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.

TYGA no: TYLY-0041 

SKU: hon-10264 Categories: , , , , , , , , ,
Read more

Lower Cowling, Race, Carbon Unpolished, KTM RC390 WSS300

382.54

(462.87 inc. VAT )

Lower Cowling, Race, Carbon Unpolished KTM RC390 WSS300

Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware

see also:

BPFL-7531 (GRP)
BPCL-7531 (Carbon Clearcoated)

TYGA no: BPCL-7531U

SKU: ktm-10163 Categories: , , , ,
Read more

Bracket, Right Footrest, Ninja 250R/300R 2013 -18

161.49

(195.40 inc. VAT )

Bracket, Right Footrest, Ninja 250R/300R 2013 -18

TYGA no: 35063-1000

SKU: kaw-10157 Categories: , , , ,
Read more