Carbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopTyga Step Kit Replacement Link Rod, 110mm
€17.49
Tyga Step Kit Replacement Link Rod, Male, 110 mm.
Uses M6x1 thread in one end and M6x1 L/H thread in the other.
Bracket ohlins rear shock, Honda NSR250 MC21/MC28
€27.34
Bracket, Rear Shock, Ohlins Conversion, MC21/MC28.
Consists of a bracket with foam to protect the reservoir, two hose clamps, and and two genuine Honda M6 bolts. This replaces the Honda part 52411-KV3-000. and recommended to be used with Ohlins rear shock part number HO110013 or similar to give full support for the shock reservoir. Note this can be used on the R, SE and SP spec models.
TYGA no: BPSY-0135Â
SKU: hon-10488 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsCarbon tank protector,Honda VFR400 NC30
€121.92
Tank Protector, Carbon, VFR400R NC30
This real carbon protector is designed to fit snuggly on the Honda VFR400R (NC30) fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCC-9035
SKU: hon-11216 Categories: ALL products, Bodywork and carbon, Honda, Shop, Various parts, VFR400RR NC30Carbon rear seat, Aprilia RS250
€773.53
This seat cowling is to be used in our Aprilia RS-250 kits, BPFS-1102.
This product is compatible with Sub frame TYLY-0065. Will not fit stock Aprilia subframe
TYGA no: BPCT-9030
SKU: apr-10071 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopMirror, Right Hand, Ninja 250R/300R 2013 -18
€63.94
Mirror, Right Hand, Ninja 250R/300R 2013 -18
TYGA no: 56001-0240
SKU: kaw-10161 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopSilencer GP-T, Aluminium 60mm, Two Stroke, Spring Mounted
€95.39
Silencer GP-T, Aluminium, Two Stroke, Spring Mounted, Assy
To complement our NX5 exhaust chambers, we wanted a silencer design which was both functional and classic. The result is this TYGA Performance GP-T style silencer. Available in three models, with carbon, carbon/Kevlar and aluminium outer tubes and with stainless end caps, it is mounted by two springs (included) for ease of installation and for looks. The silencer is strong and easily rebuildable, using rivets to assemble. Remember to order two silencers for every twin cylinder exhaust system! Also see EXSL-0069 and EXSL-0069.
Note, this silencer is only compatible with the NX5 RS250R exhaust system and cannot be mounted on other exhaust chambers in our product range.
TYGA no: EXSL-0070
SKU: hon-10903 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopRacing step kit CNC silver, CBR250RR MC22
€301.92
Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium. Uses carbon heel guard on left side hanger (the right side carbon brake/heelguard shown in the pictures is an optional extra and can be ordered with your step kit, part number BPCC-9002)
This step kit moves the peg position back 15 mm. and up 20 mm. from standard. Pitch of hanger to frame mounting holes is 106.4 mm. on left and 103.4 mm on right.