Racing step kit (adjustable) ninja 400
€529.03
Racing Step Kit, (Adjustable), Ninja 400
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Street/Race shift possible by reversing the gear change arm. No other modification necessary other than adjustment of the link rod.
Peg position is multi adjustable. The low/forward position is 15mm back and 15mm up from the standard position. Adjustable in 15mm increments to a maximum of 60mm back and up from the standard position.*
Brake light is not used on these race steps, but a simple inline pressure switch may be used.
The side stand mounting does not need to be removed.
Fitting the TYGA Step Kit for the Kawasaki Ninja 400 requires that the swingarm axle be removed from the machine, which can render the vehicle unstable. We recommend using a rear paddock stand for stability, and having an assistant can be very useful during removal and fitting of the axle.
* Peg position can be adjusted to ten positions by 2x M8 bolts attaching the hanger plate to the main plate. After a position change, adjustment of the gear change arm and link rod length will be necessary. For low/forward positions you will need to use the standard link rod.
For your safety, please ensure all fasteners are tight before use, and we recommend the use of thread locking agent (such as Loctite 242) on the 2x M8 bolts.
Waterpump rebuild set, Honda NSR250 MC21/MC28
€63.89
All necessary seals and bearing to rebuild your NSR250SP/R waterpump.
Please note that it is necessary to remove the clutch cover to overhaul the waterpump, so a clutch cover gasket may also be required.
TYGA no: NHPS-0008
SKU: hon-10557 Categories: ALL products, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsVelocity Stacks, NC30, Kit, 4 pcs
€149.37
Fuel Tank, GRP, VFR400R NC30, Unpainted
Top quality reproduction of the steel NC30 fuel tank in GRP. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
Decibel killer silencer stainless, moto maggot
€29.15
Spacer side stand, VFR750F gen 4, 94-97
Spacer, Side Stand, VFR750F Gen 4, ’94-’97
For use with:
EXPS-0119 Set, Pipe, Full Race System, VFR70R Gen.4, ’94-’97, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXDK-0007
SKU: hon-11035 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Seat pad small, flat
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9026 and BPCT-9026
TYGA no: BPSP-0001BÂ
SKU: alg-10078 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ21, RGV250 VJ22, ShopTank protector H2C, universal
€31.32
Temp Gauge, Race, Universal
Stand alone temperature gauge for race use. Ideal for monitoring engine coolant temperature.
No adapter has been fitted, so this must be configured to your own application using the fittings of your choice.
Displays temperature in Centigrade, up to 99.9C
Race use only. No back light function.
Supplied with 2x LR44 batteries (not fitted).
TYGA no: APK3317520ZA
SKU: alg-10412 Categories: 848 / 1098 / 1198, ALL products, Aprilia, By model, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Desmosedici RR, Ducati, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Hawk/Bros 400/650, Honda, Kawasaki, KTM, Mito 125, Monster, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, RVF750 RC45, Shop, Suzuki, Suzuki RGV250, SV650, Universal parts, V-Max 1985 - 2007, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, ZX10R 2011 -15, ZXR250C, ZXR400LBumb foam large,
€13.95
This foam seat bum stop is supplied with adhesive surface on back for easy and fast application. Adds the final touch to any race or race rep bike. This size is the larger of the two versions we supply. See BPSP-0003 for smaller version.
TYGA no: BPSP-0002Â
SKU: alg-10081 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, Shop, SuzukiTrottle cable A, Honda NSR250 MC21
€68.40
Throttle Cable A, MC21
TYGA no: 17910-kv3-830
SKU: hon-10706 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC21, Various parts