Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Triple Clamp Set, CNC Silver, NSR250, MC28

619.36

(749.43 inc. VAT )

CNC machined TYGA triple clamp set for your NSR250 MC28.

These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!

They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-0641

SKU: hon-10873 Categories: , , , , , ,
Read more

Decal, Windshield, Kawasaki, black, Ninja 250R 2008 -12

14.58

(17.64 inc. VAT )

Decal, Windshield, Kawasaki, black, Ninja 250R 2008 -12

TYGA no: 56052-0154

SKU: kaw-10230 Categories: , , , ,
Read more

Lower Cowling (Carbon), NC35, T13, Assy.

566.16

(685.05 inc. VAT )

This lower cowling is part of a set of bodywork BPFS-0116.

TYGA no: BPCL-9218

SKU: hon-10806 Categories: , , , , ,
Read more

Disc gear 3rd & 4th z= 17-22 drive no.3, RGV250/RS250

114.84

(138.96 inc. VAT )

VHM insert, Aprilia RS125 (alg-10176)

piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.

VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.

We are pleased that we can offer VHM products on our website.

The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design

This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.

Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl

Read more

Mirror blanking plate black, 30mm

40.73

(49.28 inc. VAT )

Handy mirror blanking plates for your 250/400 sportsbike.

No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.

Mounting pitch is 30mm, so will fit many models.

2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.

Read more

Pillion seat cover “GRP”, KTM RC390 2022 –

81.19

(98.24 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: BPFX-7731

SKU: ktm-10211 Categories: , , , , ,
Read more

set, pipe full race system oval carbon/carbon end RH exit, VFR750F gen 4, 94-97

1,425.22

(1,724.52 inc. VAT )

Set, Pipe, R.H Exit, Full Race System, Oval Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97

This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.

Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.

For unsurpassed looks, sound and performance, this system comes with the Oval Carbon/Carbon End Cap Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers.

See also our other sets with silencer included:

EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).

**Important Note**

The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.

Read more

Handlebar set 50 mm, black

230.31

(278.68 inc. VAT )

Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 50mm. inverted front suspension. See application chart below.

7 degree angle for a comfortable, yet sporty feel.

Ducati 750/900SS

Ducati Monster, Pre 2010

Honda CBR1000RR 2004

Honda CBR929/954

Honda RC45

Honda RC51 2000-05

Honda RS250 NF5/NX5 USD

Honda RVF400 NC35

Kawasaki ZX10R 2004

Kawasaki ZX14R All

Kawasaki ZX6/RR/636 2003

Suzuki GSXR1000 2001

Suzuki GSXR1100 95-98

Suzuki GSXR1300 All

Suzuki GSXR600 2004

Suzuki GSXR600 92-93

Suzuki GSXR600 94-96

Suzuki GSXR750 1993

Suzuki RGV250 VJ22/23

Suzuki TL1000R

Suzuki TL1000S

Yamaha R1 1998

Yamaha R6 2005

Yamaha YZF750 94-97

Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.

Read more