Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V

432.66

(523.52 inc. VAT )

Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V

Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has special mounting hardware and seat pad provided.

We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047

We recommend installing this seat cowling set with fairing set BPFS-0197 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.

Read more

Section, Right #1, KTM RC390 Serpent

45.13

(54.61 inc. VAT )

Section, Right #1, KTM RC390 Serpent

TYGA no: EXPT-0055

SKU: ktm-10118 Categories: , , , , ,
Read more

Step, R. Fr., MC28

77.04

(93.22 inc. VAT )

Step, R. Fr., MC28

TYGA no: 50660-KV3-700

SKU: hon-11144 Categories: , , , , ,
Read more

TYGA step kit replacement link rod 205mm, Y

16.07

(19.44 inc. VAT )

Tyga Step Kit Replacement Link Rod, Male, 205 mm.

Replacement gear link rod for your TYGA Step Kit. (Check application before ordering)

Uses M6x1 thread in one end and M6x1 L/H thread in the other, and includes both the nuts. 205 mm. in length.

TYGA no: STAR-0006

SKU: yam-10054 Categories: , , , , , , , , ,
Read more

Handle bar set racing “hinge type” black, KTM RC125/RC200/RC390 2014- 21

247.11

(299.00 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: TYLY-1631

SKU: ktm-10218 Categories: , , , , , , ,
Read more

Front brake light switch, Honda type

2.89

(3.50 inc. VAT )

Seat Cowling, (GRP), NC30/NC35 GP-T

This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,

BPFS-0148 (GRP, NC30)

BPFS-0149 (GRP, NC35)

BPFS-0150 (Carbon, NC30)

BPFS-0151 (Carbon, NC35)

The advantages of this seat cowling over stock include:

– use with rest of seat cowling kit, much lighter than stock

– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment

Tyga Performance Compatible Parts for this Product:

This product is compatible with:

BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T

TYLY-0133 Subframe, NC30/NC35 GP-T

TYLY-0130 Batterybox NC30/35 GP-T

BPFX-9234 Seat Support, NC30/NC35 GP-T

BPSP-0006 Seat Pad, GP-T

BPAC-0001 Rear Brake Reservoir Kit,

BPLT-0009 LED Taillight

BPFX-9133 Registration Plate Holder GP-T

Read more

Tyga Eyes IV Headlight, Assy.

155.90

(188.64 inc. VAT )

This sleek integrated double headlight unit uses OSRAM 35/35 halogen bulbs and modern reflector and refractor technology . Comes complete with loom and is ready to plug in. This is suitable for the TYGA Performance fairing BPFU-9028

TYGA no: BPLT-0017

SKU: hon-10844 Categories: ,
Read more

Set, Pipe, Twin Exit System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap

866.32

(1,048.25 inc. VAT )

Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-

Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.

See also BPFF-7142 for GRP version.

*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.

TYGA no: EXPS-0149

SKU: msx-10494 Categories: , , , ,
Read more