Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Silencer stainless steel round 86mm (4 stroke) 38,1mm

259.22

(313.66 inc. VAT )

This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

Supplied with silencer clamp and fitting hardware.

The Dimensions of this silencer are as follows:

I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.

Read more

Lower cowling GP-T, Honda RVF400 NC35

216.35

(261.78 inc. VAT )

Lower Cowling (GRP), NC35 GP-T, Assy.

This product is designed to be used with BPFU-9034 as part of the Bodywork set BPFS-0145

.

Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9134.

Compatible products:

This product must be used with BPFU-9034

This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:

1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.

2. Tyga exhaust can be installed with no modification

3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.

TYGA no: BPFC-0038 painted

SKU: hon-10598 Categories: , , ,
Read more

Seat cowling carbon, Honda NSR250 MC28

827.70

(1,001.52 inc. VAT )

Seat Cowling, (Carbon), MC28 GP-T

We now make four versions of our NSR250 GP Race seat cowling for use for the MC28 in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,

BPFS-0133 (GRP,Street)

BPFS-0134 (GRP Race)

BPFS-0135 (Carbon,Street)

BPFS-0136 (Carbon, Race)

The advantages of this seat cowling over stock include:

– use with rest of seat cowlign kit, much lighter than stock

– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment

Tyga Performance Compatible Parts for this Product:

This product is compatible with:

BPFX-9033, BPFX-9333, BPCX-9033 and BPCX-9333 Undertray, NSR250 GP-T

TYLY-0108 Subframe, NSR250 GP-T

BPFX-9233 Seat Support, NSR250 GP-T

BPSP-0006 Seat Pad, GP-T

BPAC-0001 Rear Brake Reservoir Kit,

BPLT-0009 LED Taillight

BPFX-9133 Registration Plate Holder GP-T

TYGA no: BPCT-9133 

SKU: hon-10464 Categories: , , , , ,
Read more

Screen Clear, NSR250 MC18 ’89

52.00

(62.92 inc. VAT )

Screen Clear, 1989 NSR250 MC18, Kit.

1989 NSR250 MC18 screen clear

Read more

Section intermediate stainless exhaust, Honda MSX125 GROM

64.13

(77.60 inc. VAT )

Section, Intermediate, Stainless, MSX125 Grom

TYGA no: EXPT-0036

SKU: MSX-10139 Categories: , , , , , ,
Read more

Water Hose, NSR250 MC21/28

16.87

(20.41 inc. VAT )

Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970

Use this jet to blank of the power jet circuit in NSR250 carbs.

Read more

Lower Triple Clamp, CNC Black, CBR600RR Forks/NSR Shaft

367.66

(444.87 inc. VAT )

Lower Triple Clamp, CNC Black, CBR600RR Forks MC21/MC28 Shaft

CNC machined TYGA lower triple clamp for the NSR250 MC21 and MC28 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

This product does not include headstock seals or bearings. To complete the set we recommend you also order:

Seals: 53214-371-010 & 53214-KA4-701

Bearings: 91015-KT8-005 & 91016-KT8-005

This product is also sold as part of a set

TYLY-1741 Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21.

TYLY-1841 Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC28.

TYGA no: TYLY-1942N

SKU: hon-10788 Categories: , ,
Read more

Pillion seat cover “carbon”, KTM RC390 2022 –

177.68

(214.99 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: BPCX-7731

SKU: ktm-10209 Categories: , , , , ,
Read more