Lower Cowling (GRP), MC18, GP-T, Assy.
€183.50
Lower Cowling (GRP), MC18, GP-T, Assy.
This product is designed to be used with BPFU-9035 as part of the Bodywork set BPFS-xxxx
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9035.
This product is supplied with lower mounting stays on the left and right.
Compatible products:
This product must be used with BPFU-9035
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting.
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9035
SKU: hon-10728 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Exhauststay Right TYGA VJ21, Suzuki RGV250 VJ21
€52.50
This product is designed to be installed as part of our TYGA Seat cowling kit for the VJ21 Kit BPFS-0121 and substitutes for the stock passenger peg hangers. It retains the use of stock mounting hardware and there is a level of adjustability in the mounting position due to the slot for the clamp position.
This product can be used as a stand alone item and does not need the rest of the kit and is suitable for replacing passenger pegs on any race VJ21 for example.
Please note this product is ‘handed’ and you need one of each TYLY-0100L and TYLY-0100R for one bike.
TYGA no: TYLY-0100R
SKU: suz-10099 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Carbon heel guards, Honda NSR125 JC22
€67.83
Carbon heal guards, Honda NSR125 JC22 (hon-10529)
These heel guards only fit the NSR125 JC22 model.
Throttle Cable A, MC28
€63.60
Throttle Cable A, MC28
TYGA no: 17910-KV3-950
SKU: hon-11165 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Mirror blanking plate black, 30mm
€40.73
Handy mirror blanking plates for your 250/400 sportsbike.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 30mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
TYGA no: TYLY-1056
SKU: alg-10126 Categories: ALL products, Honda, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Section, Final, Stainless, CBR250/300R
€103.08
Section, Final, Stainless, CBR250/300R
TYGA no: EXPT-0116
SKU: hon-10797 Categories: ALL products, By product, Exhausts, Stock list, all modelsUpper Cowling Race, (GRP) NX5 RS250R (late model style)
€328.76
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPFU-9236
SKU: hon-10944 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSeat set with carbon RC211V, NC35
€453.27
This is the seat cowling with carbon front section used in the NC35 RC211V style seat cowling kit BPFS-0035.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPCT-9018
SKU: hon-10150 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Shop