Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)

2,468.27

(2,986.61 inc. VAT )

Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)

Complete Carbon Bodywork kit which consists of the following products:

Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)

The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.

Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)

The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.

Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))

This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.

Seat Support NX5 RS250R (BPCX-9036)

Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)

Made to order, takes approx 1 to 2 weeks to be ready for shipping

TYGA no: BPFS-0189

SKU: hon-10977 Categories: , , , , ,
Read more

Cover headlight upper cowling (pair) primer, Honda VFR400 – RVF400

25.32

(30.64 inc. VAT )

Cover, (primer), pair, Headlight, Upper Cowling, Endurance

To be used on the TYGA Endurance Fairings for NC30/35

Read more

Kit, Fairing set (street) Stock shape 1989 Honda NSR250 MC18

441.91

(534.71 inc. VAT )

Kit, Fairing Set (Street), Stock Shape, 1989, NSR250 MC18

Consist of BPFU-9122 Upper Fairing,

BPFL-9122 Lower Fairing and a clear screen

TYGA no: BPFS-0173

SKU: hon-10920 Categories: , , , , , ,
Read more

Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V

610.53

(738.74 inc. VAT )

Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V

Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).

The set consists of the parts shown below All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.

The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047

We recommend installing this fairing set with seat set BPFS-0198 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.

Read more

Racing step kit CNC silver, Honda NSR250 MC18

384.49

(465.23 inc. VAT )

TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine- made step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners. One of the many advantages over the standard footrest assembly is the ability to reverse the shift pattern without removal of the side stand, so giving the ‘racer’ set-up, on the street. Kit includes gear selector link rod.

Now includes rear brake light provision.

Peg position is 20mm. up and 10mm. back. Pitch of hanger frame mounting holes is 78 mm. on left and 71.5 mm on right.

Reverse schifting is possible with this race step kit.

TYGA no: STAA-0016

SKU: hon-10366 Categories: , , , , ,
Read more

Handlebar set 41 mm, silver

216.82

(262.35 inc. VAT )

Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 41 mm. right way up front suspension see chart below for examples.

7 degree angle for a comfortable, yet sporty feel.

BMW Strada

Honda CB-1 89-90

Honda CBR1000F 93-96

Honda CBR400 NC23/29

Honda CBR600F2

Honda CBR600F3

Honda Hawk 650 RC31

Honda NSR250 MC18/21/28

Honda VFR400 NC30

Honda VFR750 90-97

Honda VTR1000 98-02

Kawasaki EX650R 06-09

Kawasaki ZX10 88-90

Kawasaki ZX6E

Kawasaki ZX6R 95-97

Suzuki GSF400/600 Bandit

Suzuki GSXF600/750/1100 Katana

Suzuki GSXR750/1100 86-87

Suzuki RGV250 VJ21

Suzuki SV650 99-09

Yamaha FZR750

Yamaha YZF600 94-95

Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.

Read more

Carbon chain guard, Suzuki GSX 1000 K5-K6

239.00

(289.19 inc. VAT )

Two piece, high quality carbon fiber chain guard made to original shape and dimensions.

Let your bike stand out from the crowd with this beautiful carbon fibre product.

TYGA no: BPCX-7003

SKU: suz-10034 Categories: , , , ,
Read more

Carbon front fender” stock shape: Yamaha TZR250 3MA

160.27

(193.93 inc. VAT )

Finally available for the Yamha RD350, TYGA Performance full race exhaust.

Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)

TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.

Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.

Parts included with this product:

1 x Left side chamber, mirror finished stainless steel

1 x Right side chamber, mirror finished stainless steel

2 x Manifolds clamps ( Left and Right)

2 x Manifolds

4 x Mounting springs

1 x Shim, Side Stand

Not included are the silencers, We recommend the TYGA shorty silencers.

Please order 2 silencers of choice to complete your order:

EXSL-0067 (Aluminium)

EXSL-0065 (Carbon)

EXSL-0066 (Carbon/Kevlar)

Please note that this exhaust system requires removal of the centre stand.

TYGA no: BPCF-7052

SKU: yam-10095 Categories: , , , , ,
Read more