Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Seat, Side Panel, Left, Black, Ninja 250R/300R 2013 -18

32.88

(39.78 inc. VAT )

Seat, Side Panel, Left, Black, Ninja 250R/300R 2013 -18

TYGA no: 53065-0058-H8

SKU: kaw-10176 Categories: , , , ,
Read more

Set exhaust, race system double maggot , KTM RC390 2014 – ’21

866.32

(1,048.25 inc. VAT )

.Set, Pipe, Race System, RC390, Stainless Moto MaggotUpdate your bike with this great TYGA performance, KTM power part!!.Set, Pipe, Race System, RC390, Stainless Moto MaggotModel 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied with decibel killers, and may not meet noise regulations in your area.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0091 for similar system with oval silencersPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>

TYGA no: EXPS-0092

SKU: ktm-10092 Categories: , , , , , ,
Read more

Decal Doohan OK

11.89

(14.39 inc. VAT )

Reproduction Doohan OK decal, white outline and bright red.

TYGA no: STIC-0009

SKU: hon-10722 Categories: , , , , , , , ,
Read more

Front cowling race RCV211, NC30 NC35 NC29

152.38

(184.38 inc. VAT )

This is a replacement part for bodywork set BPFS-0012, BPFS-0014 and BPFS-0020

Read more

Carbon chain guard, KTM RC125/RC200/RC390 2022-

141.35

(171.03 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: BPCX-7131B

SKU: ktm-10207 Categories: , , , , ,
Read more

Set, Pipe, Full Race System, Ninja 300R, Moto Maggot Silencer

519.40

(628.47 inc. VAT )

2013-2017, Set, Pipe, Full Race System, Ninja 300R, Moto Maggot Silencer

We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted Moto Maggot silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.

(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)

This system is supplied with an Moto Maggot silencer EXSL-9213

Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.

* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.

TYGA no: EXPS-0095

SKU: kaw-10067 Categories: , , , ,
Read more

Tyga Step Kit Replacement Left Side Hanger, (Adj.) CBR250R/CBR300R Assy.

65.91

(79.75 inc. VAT )

Tyga Step Kit Replacement Left Side Hanger, (Adj.) CBR250R/CBR300R Assy.

Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts. Note this is for the adjustable type. See STAH-0017 for non adjustable fixed type.

TYGA no: STAH-0045

SKU: hon-10793 Categories: , ,
Read more

Seal, Sw/Arm Bearing L., MC28

6.00

(7.26 inc. VAT )

Seal, Sw/Arm Bearing L., MC28

TYGA no: 91202-MR7-003

SKU: hon-11114 Categories: , , , , ,
Read more