Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Carbon under tank covers, Honda MSX125SF

94.45

(114.28 inc. VAT )

Carbon under tank covers, Honda MSX125SF

Fits over nasty plastic stock items and transforms the appearance of your bike.

Install with double sided tape provided or with silicone sealant for a really permanent installation

TYGA no: BPCC-7428

SKU: msx-10389 Categories: , , , , ,
Read more

Axle Slider Kit, (Orange/Black) KTM RC and Duke Series

51.61

(62.45 inc. VAT )

Axle Slider Kit, (Orange/Black) KTM RC and Duke Series

This kit is specifically designed for the KTM racer in mind. The axle sliders have been designed to help protect your bike in the event of a crash. Easy to install and look cool too in KTM orange and black.

Now you really are ready to race!

Included in this kit are the following components:

1 x left side front axle slider

1 x right side front axle slider

1 x left side swing arm mount slider

1 x right side swing arm mount slider

Read more

Big bore kit 300cc wiseco, NSR250 MC18/MC21/MC28

2,264.37

(2,739.89 inc. VAT )

This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc pistons are replaced with high performance options.

In this case we have forged Wiseco pistons that are lighter and stronger than stock. They use Wiseco rings, clips and pins.

See below for performance details for TPER-0007.

Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.

Parts included in the NSR300 kit.

Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)

Rear Head x 1

Front Head x 1

Piston x 2

Ring set x 2

Piston Pin x 2

Piston Clip x 4

S/E Bearing x 2

Head gasket x 2

Cylinder gasket x 2

RC Valve cables x 4

Water hose x 1

Exhaust Manifold x 2 (to fit TYGA pipes)

Other information:

There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different

cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.

The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.

Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:

MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.

Temp: 29 C

Press: 1015mb

Hum: 65%

Alt: 30m

MJ – #182/#185

JN – Std./Std.

SJ – #38/#38

AS – 1.5 turns out

PwrJ – Std./Std.

Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.

This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.

At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.

Read more

Flange, Silencer mounting (stainless steel) 2 stroke

12.10

(14.64 inc. VAT )

This Silencer Mounting Flange allows for fitment of all TYGA silencers to any stainless steel two stroke expansion chamber. Simply cut off the original mount flange and weld on the TYGA mount flange.

26.5mm inside diameter. Some expansion chamber systems may require a reducing sleeve, or modfication to the mount flange for the perfect fit.

Read more

Upper Cowling (Race GRP), NC23 Upper Cowling, T9, Assy.

266.15

(322.04 inc. VAT )

Upper Cowling (Race GRP), NC23 Upper Cowling, T9, Assy.

Replacement upper cowling for BPFS-0169 (made to order)

This race upper fairing is made from a modified street version by filling in the headlight hole (s) and blending with the surrounding surface area.

TYGA no: BPFU-9127

SKU: hon-10724 Categories: ,
Read more

Silencer aluminium premium SHORTY 60mm 2 stroke stainless endcap

113.23

(137.01 inc. VAT )

This shorty (55mm shorter than our other 2 stroke silencers) aluminium two stroke silencer offers the same excellent value for money that our silencers always have but now with improved build quality and precision

– CNC machined mounting end cap with 3 holes precision drilled for mounting to exhaust chamber flange

– stainless steel exit end cap and nozzle

– cartridge glass wool insulation for greater longevity

– lightweight: weighs just 0.6 kg

– tough anodised body finish for enhanced looks and weather resistance

– Silencer is designed with a built-in sealing ‘O’ ring and stainless steel bolts and washers are provided.

Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.

Compatible Parts:

All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!

Other Alternative Products:

EXSL-0065 Shorty Carbon

EXSL-0066 Shorty Carbon/Kevlar

EXSL-9005 Aluminium

EXSL-0003 Carbon

EXSL-0004 Carbon/Kevlar

Read more

Airbox carbon, A kit, Honda RS250 NX5

673.59

(815.04 inc. VAT )

Airbox, Carbon/Kevlar, NSR250 MC21/MC28

This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.

Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007

TYGA no: BPCX-0008

SKU: hon-11311 Categories: , , ,
Read more

Front wheel spacer kit aluminium, Honda NSR250 MC21/M28/NC30

34.40

(41.62 inc. VAT )

Replace the heavy steel front wheel spacers and wheel bearing distance spacer with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!

TYGA no: TPER-0024 

SKU: hon-10395 Categories: , , , , , , , , ,
Read more