Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Side mount lower cowling, Honda VFR400 NC30

9.04

(10.94 inc. VAT )

Fuel Tank, Carbon, VFR400R NC30

Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).

Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).

Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.

Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.

TYGA no: BPSY-0323

SKU: hon-11390 Categories: , , , , , , ,
Read more

Stay, Silencer, Yamaha R25/R3

75.05

(90.81 inc. VAT )

Stay, Silencer, Yamaha YZF-R25 and YZF-R3

Used on EXPS-0072, EXPS-0073 and EXPS-0074.

Two different length mounting bolts are provided to allow the stay to be fitted alone, or to be fitted with the passenger footrest over the top.

TYGA no: TYLY-0149

SKU: yam-10075 Categories: , ,
Read more

Tank cover rear, CBR250RR MC22

138.49

(167.57 inc. VAT )

This product is part of set BPFX-9225, (the other part being BPFX-9225F). This tank cover is designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example.

TYGA no: BPFX-9225R

SKU: hon-10212 Categories: , , , ,
Read more

TYGA bike dust cover Black (street), Aprilia Racing

63.10

(76.35 inc. VAT )

Specially made for your Aprilia.

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

TYGA no: TMER-0179

SKU: apr-10112 Categories: , , , , , , , , , ,
Read more

Set exhausts side by side stainless steel, Honda NSR250 MC28

769.95

(931.64 inc. VAT )

THE exhaust set for your Honda NSR250 MC28, cone welded for that HRC factory look!

Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.

For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)

NEW! Our latest design, is provided with silencers clamping hardware which mounts directly to the stock MC28 silencer stays for a more secure and firm installation.

By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.

Please note this product fits MC28 only. For MC21, please select EXCS-0005A

This product, EXCS-0005B, has one chamber exiting left and one chamber exiting on the right.

Parts included with this product:

1 x left side chamber, side by side (left exiting) stainless steel

1 x right side chamber, side by side (right exiting) stainless steel

2 x silencer single clamps and mounting bolts, washers and nuts

2 x manifolds

2 x mounting flanges

4 x mounting springs

Not included are the silencers.

Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set

TYGA no: EXCS-0005b

SKU: hon-10306 Categories: , , , , , ,
Read more

Seat set street Tyga doubleseat, NC30 kit

748.25

(905.38 inc. VAT )

Seat set street Tyga doubleseat, NC30 kit

Practicality

This seat cowling kit retains the stock NC30 sub frame and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.

This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point. Rear light LED.

The seat cowling keeps the tank in the stock position and the fuel cock is accessible.

Compatibility

This kit can be used with either stock Honda fairings or TYGA ones. If used with hon-10065 (as shown in the photos), some repositioning of the side stays is required because hon-10065 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.

This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats and some modification of the electrical component positions as well as stays for the front sub frame and tank mounting positions.

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

TYGA no: BPFS-0078

SKU: hon-10067 Categories: , , , , , ,
Read more

Carbon front fender “stock type” , Honda VFR750 RC30

231.20

(279.75 inc. VAT )

Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)

Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.

TYGA no: BPCF-0011

SKU: hon-11293 Categories: , , , ,
Read more

Lower cowlingstay left

10.23

(12.38 inc. VAT )

Lower left cowl stay set. Used with TYGA step kit STAA-0006.

TYGA no: BPSY-0074

SKU: apr-10030 Categories: , , , , ,
Read more