Seat Bum clamp ( replica), RC30
€32.23
TYGA no: BPCP-0012C
SKU: hon-11535 Categories: ALL products, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, VFR750R RC30Silencer stainless round, WSS300 (race) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0174p
SKU: ktm-10144 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSeat cowling (GRP) race cup style, KTM RC125/RC200/RC390
€213.32
eat Cowling, Race, (GRP), Cup Style, KTM RC390
This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. We also modified the mounting points to make it easier to install. Mounting points are reinforced with carbon/Kevlar at the mounting points and is primed and ready to accept paint.
This product is supplied with all mounting hardware.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 125, 200 and 390 RC models and is for race use only.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: BPFT-7131
SKU: ktm-10031 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopCarbon/kevlar Airbox , Honda RS250 NX5
€520.00
Air Box, Carbon/Kevlar, RS250, NX5
This high quality carbon/Kevlar air box is a direct replacement for the stock HRC one (80101-NX5-770) It is supplied ready to install and includes the following actual HRC or equivalent TYGA aftermarket parts:
Ref Part Number Description Qty Req
1 55204-GJ2-000 GROMMET, OIL TUBE 2
2 64234-NX5-770 SEAL,GAP 3
3 80101-NX5-770 BOX,CARBRETOR (se) 1
4 80102-NX5-770 RUBBER,BOX SIDE 2
5 80108-NX5-770 FILTER,CARB BOX 1
7 90108-GK1-000 BOLT, FLANGE SH (6×12) 2
8 90652-ND5-000 TY-WRAP (2.4×92) 5
9 90654-NX5-770 STUD, FASTENER 35 1
10 90655-NX5-770 GROMMET, FASTENER 1
11 90656-NX5-770 SPRING,FASTENER 35 1
12 90754-NX5-770 STUD, FASTENER 30 (se) 1
13 90755-NX5-770 GROMMET, FASTENER 1
14 90756-NX5-770 SPRING, FASTENER 1
15 91082-NF5-000 RIVET, BLIND (2.4×5.7) 4
TYGA no: BPCX-0004
SKU: hon-10683 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsExhaust stay GP-T, Honda RVF400 NC35
€71.27
This exhaust stay is designed to be used with our GP-T kit for the NC35 and attaches to subframe TYLY-0133. Note for NC30, use TYLY-0174
TYGA no: TYLY-0175
SKU: hon-10592 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Rear sprocket aluminium gold, Honda CBR500
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0111-40T - TYSR-0111-43TÂ
SKU: hon-10331 - hon-10334 Categories: ALL products, By product, CBR500R, Honda, SprocketsSeat set RVF , NC35 (no taillight holes)
€242.59
Stock shape seat cowling, race with no taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please note, to order this product with taillight holes, please order BPFT-9004.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM seat pad
TYGA no: BPFT-9104
SKU: hon-10420 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon exhaust chamber guard, KTM SX250/SX300
€160.51
Exhaust Chamber Guard (Carbon), KTM250/300 Off-road
This tough carbon exhaust guard is designed to fit snuggly over the stock KTM250/300 off-road models from 2005 to 2015. Constructed using high strength epoxy resins and with a layer of kevlar on the inside for extra protection, this guard is the best on the market.
Fits in minutes
Supplied with mounting hardware as shown in the photo