Carbon tank shrouds with duct and grill, Honda MSX125 GROM
€172.49
Tank Shrouds, With Duct and Grille, (Pair), (Carbon), MSX125 Grom. Looks cool and makes your bike stand out from the crowd.
TYGA no: BPCX-7828
SKU: MSX-10179 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopSeal, Crank Centre, MC28
€4.41
Seal, Crank Centre, MC28
TYGA no: 91301-KV3-771
SKU: hon-11105 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Exhaust Hanger, Aluminium, Ninja 400
€49.83
Exhaust Hanger, Aluminium, Ninja 400
Lightweight hand welded aluminium racing exhaust stay, this product is a direct replacement for stock passenger foot peg hanger and ideal for any race bike or custom project. The exhaust stay is supplied with a removable bracket to mount the rear brake reservoir.
Compatible with the following TYGA silencers and Slip-On sets:
EXSL-0071
EXSL-0072
EXPS-0100
EXPS-0101
TYGA no: TYLY-0213
SKU: kaw-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-Exhaustset stainless steel carbon silencer round, Kawasaki ZXR250
€639.76
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round carbon silencer EXSL-0032
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.P Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifold<iframe width="560" height="315" src="https://www.youtube.com/embed/z5hGKrpQ56c" frameborder="0" allowfullscreen></iframe>
TYGA no: EXPS-0015
SKU: kaw-10017 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopLower cowling track , Honda VFR750 RC30
€165.11
Lower cowling “track”, Honda VFR750 RC30 (hon-10567)
Direct replacement for OEM Honda lower cowling and due to being constructed with strong flexible epoxy resin is thinner and therefore about 65% the weight of the stock lower cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 upper cowlings.
Carbon seat set race, Aprilia RS250
€1,059.04
Due to popular demand, our GP seat cowling kit is now available in carbon race version. These panels are both lighter and stronger than GRP. Finshed in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown below which are also available separately.
*Please note, does not include front fairing kit which can be ordered, Graphics shown in photos are not included.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS-250
If you have left and right exiting chambers (side by side) you will need to add 1 X exhaust stay to your order (Only one supplied in kit for twin right exiting chambers)
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fot the lower TYGA cowling.
TYGA no: BPFS-0168
SKU: apr-10087 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopCarbon Rear hugger, Aprilia RS250
€188.86
This is a stock shaped hugger complete with mounting holes pre drilled for ease of fitment.
Weighs a fraction of the stock one at approx. 250g.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCH-9007
SKU: apr-10022 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopSeat Cowling (GRP) MC18, Stock Shape, Single Seat, Race
€263.33
Seat Cowling (GRP), NSR250 MC18, Stock Shape, Single Seat, Race
This seat cowling is designed for the classic racers out there or competing in classes where you need to keep the stock silhouette. It is a full-on race version with the seat area covered over for maximum rider feedback when on the limit.
TYGA no: BPFT-0222
SKU: hon-10913 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, Shop