Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Pro arm wheel spacer silver taper fit , Honda RC30 RC40 RC45 RS250 NX5

24.56

(29.72 inc. VAT )

Taper fit, rear Pro Arm rear wheel spacer. Machined from 7075 T6 aluminium. Light weight and attractive.

This spacer is a direct replacement for the rear wheel Pro Arm spacer on Honda Pro Arm models such as the RC30, RC40, RC45, RS250 NX5. Not suitable for the NC30, NC35, MC28 which uses a flat fitment on where it clamps to the wheel. (See TYLY-0096, TYLY-1096, TYLY-2096 and TYLY-3096)

TYGA no: TYLY-0196

SKU: hon-10526 Categories: , , , , , ,
Read more

Carbon chain guard stock type, Honda monkey 125 2018

130.09

(157.41 inc. VAT )

Carbon chain guard stock type, Honda monkey 125 2018

Carbon direct replacement for original part. Lighter and looks way, way cooler!

TYGA no: BPCX-7342

SKU: msx-10442 Categories: , , , ,
Read more

Carbon luggage compartment lid, Honda VRT1000 SP1/SP2

99.35

(120.21 inc. VAT )

This is a direct replacement for the OEM Honda part. To be used with our carbon seat cowling or can be used with the OEM Honda plastic seat cowling

SKU: hon-10573 Categories: , ,
Read more

Genuine HRC sticker set

37.58

(45.47 inc. VAT )

TYGA Bike Dust Cover, Blue, Rothmans Honda

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Read more

TYGA / Kitaco Power up kit stainless , Honda MSX125 GROM

666.94

(807.00 inc. VAT )

TYGA/KITACO Power Up Kit, Stainless Type

This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.

Parts

This product consists of the components shown below, namely:

EXPS-0052 Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap

KIT-300-1432010 KITACO Type 2 Camshaft

KIT-763-1432010 KITACO i-Map. Fuel Injection Controller

For those who want a Type 1 camshaft, please put this in the commentbox at check out.

Option:

KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.

Description:

Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.

Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!

The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html

The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:

i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html

Read more

Section, Header, Right, Stainless, Ninja 250R

79.66

(96.39 inc. VAT )

Header, Right. Used on EXPS-0014, EXPS-0015, EXPS-0016, EXPS-0017 and EXPS-0018.

TYGA no: EXPT-0010

SKU: kaw-10103 Categories: , , , , ,
Read more

Carbon heel guards right , universal

44.37

(53.69 inc. VAT )

Right side carbon fibre heel guard. It can be fitted to many other models, being suitable for most models which have Nissin master cylinders with 45-49 mm. pitch mounting holes.

Note this product is not supplied with any of our step kits to keep the costs down but feel free to order it at the same time as you make your step kit order to complete the transition

Read more

Set exhausts side by side stainless steel, Honda NSR250 MC18

962.68

(1,164.84 inc. VAT )

This would the best looking exhaust we ever made, and it performance to!

Tyga Performance is probably the only company offering stainless steel expansion chambers for the MC18. These exquisitely crafted pipes are designed to give maximum power, while at the same time to give sufficient clearance for the MC18 swing arm; quite a demanding feat but one achieved by the curving the header design. This system has the two silencers exiting, not unlike the 1989 MC18 stock system, in the high level left and right position and the silencer clamps are provided which mount onto the stock 1989 silencer mounting brackets.

For the 1988 MC18, this system can be installed but requires removal of the passenger footpeg hangers and replaced with special TYGA silencer brackets (not included in this set) So for 1988 owners, remember to order 2 x BPSY-0130

Parts included with this product:

1 x left side chamber, side by side (left exiting) stainless steel

1 x right side chamber, side by side (right exiting) stainless steel

2 x silencer single clamps and mounting bolts, washers and nuts

2 x manifolds

2 x mounting flanges

4 x mounting springs

1 x Radiator lower mounting stay

1 x lower cowling rear mounting stay

Not included are the silencers which you need to select from our choice of aluminium, carbon and carbon/Kevlar types. Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.

TYGA no: EXCS-0003 

SKU: hon-10357 Categories: , , , , , ,
Read more