Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Seat cowling (grp) stock shape street single, Honda VFR400 NC30

242.66

(293.62 inc. VAT )

Seat Cowling (GRP), NC30, Single, Stock Shape, Street

Stock shape seat cowling with taillight holes. Single seat, direct replacement for stock NC30 seat cowling in the same shape but with RC30 style single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.

Please note:

for similar product but with no taillight holes, please order BPFT-0221.

for similar product but with passenger seat pad area open, same as stock, order BPFT-0021

Compatible Parts:

All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

TYGA no: BPFT-0121

SKU: hon-10493 Categories: , , , , , ,
Read more

Carbon rear protector, Honda MSX125 MK1 and Mk2

271.68

(328.73 inc. VAT )

Carbon rear protector, Honda MSX125 MK1 and Mk2

Easy to install, prevents road debris and water flicking up on the rear of your bike and looks way cool!

Not cheap plastic, but a beautiful carbon product.

TYGA no: BPCH-7228

SKU: MSX-10388 Categories: , , , , , ,
Read more

Carbon rear seat, Aprilia RS250

773.53

(935.97 inc. VAT )

This seat cowling is to be used in our Aprilia RS-250 kits, BPFS-1102.

This product is compatible with Sub frame TYLY-0065. Will not fit stock Aprilia subframe

TYGA no: BPCT-9030

SKU: apr-10071 Categories: , , , , ,
Read more

Bodywork Set 2, GRP, RC36-2 RC30 Style, Race

3,181.20

(3,849.25 inc. VAT )

Steering Stopper, Honda VFR750R RC36 (94-97)

Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.

TYGA no: BPFS-0239

SKU: hon-11481 Categories: , , , , ,
Read more

Section intermediate stainless exhaust, Honda MSX125 GROM

64.13

(77.60 inc. VAT )

Section, Intermediate, Stainless, MSX125 Grom

TYGA no: EXPT-0036

SKU: MSX-10139 Categories: , , , , , ,
Read more

Silencer stainless round, WSS300 (race) system, KTM RC390

384.78

(465.58 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: EXSL-0174p

SKU: ktm-10144 Categories: , , , , ,
Read more

Decal Doohan OK

11.89

(14.39 inc. VAT )

Reproduction Doohan OK decal, white outline and bright red.

TYGA no: STIC-0009

SKU: hon-10722 Categories: , , , , , , , ,
Read more

Silencer stainless round, WSS300 (race) system, KTM RC390

406.03

(491.30 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: EXSL-0109

SKU: ktm-10200 Categories: , , , , ,
Read more