Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Carbon seat set race, Aprilia RS250

1,059.04

(1,281.44 inc. VAT )

Due to popular demand, our GP seat cowling kit is now available in carbon race version. These panels are both lighter and stronger than GRP. Finshed in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown below which are also available separately.

*Please note, does not include front fairing kit which can be ordered, Graphics shown in photos are not included.

This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS-250

If you have left and right exiting chambers (side by side) you will need to add 1 X exhaust stay to your order (Only one supplied in kit for twin right exiting chambers)

For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.

The dash is different, the digital meters (MK2) fits the TYGA frame.

Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.

The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.

The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fot the lower TYGA cowling.

TYGA no: BPFS-0168

SKU: apr-10087 Categories: , , , , ,
Read more

Exhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22

305.44

(369.58 inc. VAT )

Bare replacement left side chamber for chamber set EXCS-0010L

TYGA no: EXCB-0010L

SKU: suz-10108 Categories: , ,
Read more

Carbon front fender stock shape, Honda Monkey 125 2018-

153.21

(185.38 inc. VAT )

Front Fender, Carbon, stock shape, Monkey 125 2018-

Carbon direct replacement for original part. Lighter and looks way, way cooler!

TYGA no: BPCF-7042

SKU: MSX-10426 Categories: , , , ,
Read more

Carbon belly Pan Race/street , WSS300 TYGA version, KTM RC390

466.05

(563.92 inc. VAT )

Carbon belly Pan Race/street , WSS300 TYGA version, KTM RC390

This carbon belly pan follows the design of the KTM WSS300 but we have modified it so it can be used on the street too! This means that unlike the KTM design, you can install this belly pan with either the sidestand installed or not and use either a street or race gear shift. This belly pan is compatible with our WSS300 exhaust system EXPS-0111 and EXPS-0112.

All fitting hardware included

See table below for compatibility between belly pans and exhaust systems.

Note, we also offer this product in GRP unpainted and in GRP Painted White see the following products for details:

BPFL-7431
BPFL-7431White
Please do note the product photos are showing the unpainted version

TYGA no: BPCL-7431

SKU: ktm-10152 Categories: , , , , ,
Read more

Seat Cowling (GRP), NX5 RS250R, Assy.

402.02

(486.44 inc. VAT )

Seat Cowling (GRP), NX5 RS250R, Assy.

Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR racer look as ridden by Ukawa and Okada. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat uses a lightweight aluminium stay (included) to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.

Comes with seat support BPFX-9036

TYGA no: BPFT-9036

SKU: hon-10907 Categories: , , , , ,
Read more

Carbon engine cover left, ninja 400 2018 –

144.93

(175.37 inc. VAT )

Engine Cover, (Carbon), Left, Ninja 400, 2018-

This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

See also BPCC-7140R and BPCC-7140 ( set with left and right cover)

TYGA no: BPCC-7140L

SKU: kaw-10130 Categories: , , ,
Read more

set, pipe full race system oval carbon/carbon end RH exit, VFR750F gen 4, 94-97

1,425.22

(1,724.52 inc. VAT )

Set, Pipe, R.H Exit, Full Race System, Oval Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97

This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.

Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.

For unsurpassed looks, sound and performance, this system comes with the Oval Carbon/Carbon End Cap Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers.

See also our other sets with silencer included:

EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).

**Important Note**

The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.

Read more

Blank, Booster Bottle, MC21 (pair)

6.26

(7.57 inc. VAT )

Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970

Use this jet to blank of the power jet circuit in NSR250 carbs.

TYGA no: TYLY-0074

SKU: hon-11255 Categories: , , , , , ,
Read more