Fairing set street RC211V TE3, NC35 kit
€910.45
The kit faithfully reproduces many of the 2006 model RC211V fairing features including front air ducts, side air duct design and full console joining up to the tank. Differs in headlight fitment from BPFS-0013.
This set of bodywork requires extensive modification of the NC35 including a tank cover, a meter stay for quick fastening of fairing upper and for the instruments to gain clearance with headlights and all the fitting hardware. It also includes a steering stopper to limit steering movement.
Comprises the parts shown below which are also available separately:
*A clear screen is provided unless you specify tinted in the comment box at check out
TYGA no: BPFS-0033
SKU: hon-10129 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopGearshift lever replacement, universal Tyga
€58.66
Replacement gear lever for your TYGA Step Kit. Complete with bearings.
TYGA no: STAL-0002
SKU: alg-10038 Categories: ALL products, Aprilia, CBR250R 2011 - 15, CBR250RR MC22, CBR400RR NC29, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Hawk/Bros 400/650, Honda, Kawasaki, KSR110 2005- 10, KTM, Ninja 400R 2018-, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RVF400RR NC35, Shop, Suzuki, Various parts, VFR400RR NC30, VTR1000Sp1SP2, YZF-R25/R3Rear sprocket aluminium gold, Suzuki RGV250
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0105-40T - TYSR-0105-48T
SKU: suz-10071 - suz-10081 Categories: ALL products, By product, CNC parts, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Sprockets, Suzuki, Various parts, Various partsFuel Tap / Pet Cock, MC21
€103.58
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 16950-KV3-682
SKU: hon-11273 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250 MC21, ShopTank filler cap racing , Kawasaki type 2
€69.87
ank Filler Cap, Keyless, Racing Type, Kawasaki Type 2
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most Kawasaki sportsbike models around the years 2003-2006. See list below for list of models.
Suitable for the following models:
- ZX-14 (2006-2008)
- ZZR1200 (2002-2005)
- ZRX1200R (2001-2005)
- Z750 (2003-2007)
- Z1000 (2003-2006)
- ZX-10R (2004-2005)
- ZX-9R (2000-2003)
- ZX-6RR (2003-2006)
- ZX-6R (2000-2006)
- ZX-6RR 636 (2003-2006)
- ZZR600 (2005-2007)
- 650R/ER-6 (2006-2007)
- ZX1100 (1995 & up)
See also TYLY-0114 and TYLY-0116 for other Kawasaki types.
Set, Pipe, Twin Exit System, High Level, MSX125 2021-, Carbon Oval/Carbon End Cap
€962.68
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Carbon stay L lower cowl, Honda CBR250RR MC22
€39.27
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCC-7320
SKU: hon-11466 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersUpper cowling set GRP endurance Painted RR, Honda RVF400 NC35
€590.33
Upper Cowling Set, Endurance, (GRP) NC35, Painted RR
This Suzuka 8 Hour inspired cowling painted RR is supplied with four headlight covers, one pair in matching black and red and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC35 headlight and mounts to the bike in the same way as the Honda part including mirror stay, meter stay, mirrors, air duct, indicators etc. It can be used either with the TYGA lower cowling BPFL-0103 Painted RR, or can be used with stock Honda NC35 lower and inner cowling too. We also supply this product in carbon, unpainted and painted in RT colours ready to install. See our product list for the painted versions.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
TYGA no: BPFS-0154 RR
SKU: hon-10642 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35