Section, Final, Stainless, CBR250/300R
€103.08
Section, Final, Stainless, CBR250/300R
TYGA no: EXPT-0116
SKU: hon-10797 Categories: ALL products, By product, Exhausts, Stock list, all modelsTYGA step kit replacement sidestand spacer, KTM RC390
€18.78
Tyga Step Kit Replacement Sidestand Spacer, KTM RC390
TYGA no: STAH-0047C
SKU: ktm-10075 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-Silencer kevlar/carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40kg) is made from CNC machined end caps joined by a Carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0065 Shorty Carbon
EXSL-0067 Shorty Aluminium
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0066
SKU: alg-10259 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopFairing set street T13, Honda VFR400 NC30
€966.12
Newly introduced for 2013, the T13 body kit has been designed to be both contemporary and stylish and provide an updated alternative to our popular RC211V kits. The GRP panels this kit uses are made from using high quality epoxy resin and is both light and flexible. We also make the same kit but extensive use of carbon fiber, see BPFS-0120.
This set of bodywork requires modification of the NC35 including a tank cover, a meter stay and all the other components listed below which are also available separately.
*A clear screen is provided unless you specify tinted in the comment box at check out
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0119
SKU: hon-10354 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Gasket cylinder 0,4 NF5
€12.29
Gasket, Cylinder, 0.4mm NF5
Fits MC16~28. Use to adjust deck height/squish/compression ratio.
TYGA no: 12191-NF5-610
SKU: hon-10413 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopTyga Step Kit Replacement Link Rod, 238mm
€16.92
Tyga Step Kit Replacement Link Rod, Male, 238 mm.
Uses M8x1.25 thread in one end and M8x1.25 L/H thread in the other. 238mm in length.
Carbon sprocket cover, KTM Duke390/RC390 2012 –
€110.40
Sprocket Cover, (Carbon), KTM390 Duke/ RC390
This lightweight carbon sprocket cover weighs less than the stock one and adds style to your ride.
Please note, this product fits the 390 Duke and RC390.
Let your KTM RC stand out from the crowd this beautiful carbon product.
KTM powerpart!
TYGA no: BPCC-7131
SKU: ktm-10028 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Duke 390 2012-16, KTM, RC 390, RC390 2022-, ShopLower Triple Clamp, CNC Black, CBR600RR Forks/NSR Shaft
€367.66
Lower Triple Clamp, CNC Black, CBR600RR Forks MC21/MC28 Shaft
CNC machined TYGA lower triple clamp for the NSR250 MC21 and MC28 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set
TYLY-1741 Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21.
TYLY-1841 Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC28.