Upper stay, Tyga Gp MC18/MC21/MC28
€70.24
Lightweight GP style upper stay to use on the GP style fairing
Compatible Parts
Upper cowlings, BPFU-0004, BPFU-0005, BPFU-0015 and BPFU-9012. For use with MC18, MC21 and MC28 models only
TYGA no: TYLY-0001
SKU: hon-10253 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopDisc gear 3rd & 4th z= 17-22 drive no.3, RGV250/RS250
€114.84
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Upper cowling stock shape painted RT, Honda RVF400 NC35
€545.50
Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings but indicator positions smoothed off. Should be used with BPFL-0103 (Painted RT)
TYGA no: BPFU-0029 (Painted RT)
SKU: hon-10519 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon Lower cowling, stock shape, NXA RS250R (2001- ’08)
€524.11
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon front fender stock shape, Honda MSX125 2021 –
€264.55
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCF-7048
SKU: msx-10476 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopCover headlight upper cowling (pair) yellow, Honda VFR400 – RVF400
€27.34
Cover, (yellow), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: SCRE-9011
SKU: hon-10644 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Stay, reg/rec race, Kawasaki Ninja 400 2018-
€19.98
Stay, Reg/Rec, Race, Ninja 400
TYGA no: BPSY-0230
SKU: kaw-10150 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Rear wheel spacer kit aluminium, Suzuki RGV250
€76.31
Replace the heavy steel rear wheel spacer and wheel bearing distance spacer on the VJ22 with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!
TYGA no: TPER-0054
SKU: suz-10090 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, Suzuki