Engine stand, Aprilia RS250/Suzuki RGV250
€81.09
Engine stand for Aprilia RS-250 and RGV250, (VJ21 and VJ22 models).
No more chasing the engine around the bench as this stand allows for dual positioning so that whichever cylinder is being serviced is always easily accessible from the top.
Also rather handy for draining oil on a loose engine, or just neat storage.
Uses standard engine rubbers in engine mounts and is held in the stand with the standard engine mount bolts.
Zinc plated steel for corrosion resistance and good looks. A necessity for any RGV250 or RS250 engine builder!
TYGA no: TYTO-0029
SKU: alg-10124 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Universal parts, Various parts, Various parts, Various partsSeat set race, Honda NSR250 MC21
€503.66
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21. The kit comprises parts shown in the picture which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0059Â
SKU: hon-10226 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopHandlebar Clamp, Right, Black, 48 mm.
€98.58
Handlebar Clamp, Right, Black, 48 mm.
Replacement handlebar clamp for handle bar set TYLY-1012
Main step holder right, Honda MSX125 GROM
€72.27
Main step holder right OEM Honda part
TYGA no: 50600-K26-900
SKU: MSX-10027 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopFuel Tank, Carbon, VFR400 NC30
€1,444.49
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPCG-0005
SKU: hon-11228 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Set, Pipe, Full Race System, Ninja 300R, Oval Carbon Silencer
€769.95
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Carbon Oval Silencer
We have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted Carbon Oval silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Carbon oval silencer EXSL-0043
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0015.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0096
SKU: kaw-10068 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Set pipe Stainless full race system “round carbon silencer”, Kawasaki ZXR400L
€962.68
Set, Pipe, Stainless, Full Race System, Round Carbon Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long carbon round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0140 for similar system.
Front Fender, Carbon, Stock Shape, VJ21
€190.60
Front Fender, Carbon, Stock Shape, VJ21
Real carbon fibre reproduction of the stock Suzuki RGV250 VJ21 front fender.
Finished in high gloss, adds beauty and reduces unsprung weight. (Weight of part approx. 0.26 kg)
TYGA no: BPCF-0019
SKU: suz-10127 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250