Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Upper cowling race, Suzuki RGV 250 Tyga, assy

224.26

(271.35 inc. VAT )

This upper cowling is to be used in our VJ22 kit BPFS-0061.

This product is compatible with lower cowling BPFL-0026. Will not fit stock Suzuki lower cowling

TYGA no: BPFU-9126 

SKU: suz-10073 Categories: , , , , , ,
Read more

Seat Pad (reproduction), HRC RS125 NX4

22.73

(27.50 inc. VAT )

Holder, Carbon, Brake Hose, NSR500V Style

This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.

It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.

Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.

Read more

Seal, Clutch Inner, MC28SP

13.63

(16.49 inc. VAT )

Seal, Clutch Inner, MC28SP

TYGA no: 91207-KV3-781

SKU: hon-11109 Categories: , , , , ,
Read more

Set exhausts side by side stainless steel “crossover type”, Yamaha RD350LC (4LO)

702.49

(850.01 inc. VAT )

Finally available for the Yamha RD350, TYGA Performance full race exhaust.

Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)

TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.

Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.

Parts included with this product:

1 x Left side chamber, mirror finished stainless steel

1 x Right side chamber, mirror finished stainless steel

2 x Manifolds clamps ( Left and Right)

2 x Manifolds

4 x Mounting springs

1 x Shim, Side Stand

Not included are the silencers, We recommend the TYGA shorty silencers.

Please order 2 silencers of choice to complete your order:

EXSL-0067 (Aluminium)

EXSL-0065 (Carbon)

EXSL-0066 (Carbon/Kevlar)

Please note that this exhaust system requires removal of the centre stand.

TYGA no: EXCS-1044

SKU: yam-10082 Categories: , , , , ,
Read more

Seat Support, (GRP), MC18, GP-T

50.22

(60.77 inc. VAT )

Seat Support, (GRP), MC18, GP-T

This product is to be used with subframe TYLY-0183 and seat cowlings BPFT-9035 and BPCT-9035.

TYGA no: BPFX-9235

SKU: hon-10733 Categories: , , , ,
Read more

Set exhaust with header, race system without silencers

557.94

(675.11 inc. VAT )

This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.

Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.

For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.

Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.

TYGA no: EXPS-0094

SKU: ktm-10095 Categories: , , , , , ,
Read more

Decal set, type 9 astroid black scheme, Honda MSX125 GROM

53.08

(64.23 inc. VAT )

Decal Set, MSX125, Type 9, 2015 Asteroid Black Metallic Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.

TYGA no: STIC-0026X

SKU: MSX-10317 Categories: , , , ,
Read more

Carbon tank filler cap cover cover, Suzuki RGV 250

34.06

(41.21 inc. VAT )

Carbon Tank Filler cap Cover. Fits Suzuki RGV250, and other models.

TYGA no: BPCC-0010

SKU: suz-10003 Categories: , , , , , , , ,
Read more