Screen MiniRacerXtreme, Honda MSX125 GROM
€52.00
Screen MiniRacerXtreme, Honda MSX125 GROM
This screen fits the TYGA bodywork
TYGA no: SCRE-0163- SCRE-0164
SKU: msx-10260 - msx-10261 Categories: ALL products, Aprilia, Bodywork, Honda, MRX, MSX125 2013 - 2015Carbon cover, rev. Counter 91,5mm, Honda
€32.14
Carbon cover, rev. Counter 91,5mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC21 NSR250
MC22 CBR250RR
NC29 CBR400RR
NC35 RVF400
SC28 CBR900RR
Also available as a complete set with Carbon speedo, temp gauge and rev counter covers, see BPCC-0028
This product might also fit other models.
TYGA no: BPCC-0023
SKU: hon-10611 Categories: ALL products, Carbon, CBR250RR MC22, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsStud, Cylinder, 8X40, NSR150SP
€4.27
Stud, Cylinder, 8X40, NSR150SP
TYGA no: 92900-08040-0E
SKU: hon-11102 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR150SP, NSR250Seat set race, Aprilia RS250
€500.14
Seat set race, Aprilia RS250
This kit comprises all the parts shown on picture, which are also available separately.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS250 MKII
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.(order alg-10015, for cooling tank)
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fit the lower TYGA cowling.
TYGA no: BPFS-0103
SKU: apr-10035 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250, ShopCarbon front fender stock shape, Honda RS250R NXA
€227.52
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Used JDM Honda Headlights Refurbished (set)
€330.57
TYGA no: Used NC30 Headlights
SKU: hon-11532 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon side cowling A right, KTM RC125/RC200/RC390
€300.99
Side Cowling A, Right, Race (Carbon), KTM RC125/200/390
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7331R TYGA Performance Side Cowling B, Right, Race (GRP), KTM RC125/200/390.
or
BPCX-7331R TYGA Performance Side Cowling B, Right, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: BPCX-7231R
SKU: ktm-10054 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopCarb Service Kit A, 10 pieces, Honda NT650
€24.09
Carb Service Kit A, 20 pieces, Honda NT650
LiteTek Carburettor Seal Kit to suit: Honda NT650 (Hawk 650)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-030 Float Bowl Seal, Material: Flourosilicone (Part of assembly 16010-MR1-691)
2x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of assembly 16010-MR1-691
2x WS-001 Pilot Screw Washer, Material: Stainless Steel (Part of assembly 16016-MAH-670)
2x OR-009 Oval Ring, Material: Viton 70A (Part of assembly 16010-MR1-691
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of assembly 16010-MR1-691