Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Screen RSW, Honda NSR250 MC21/MC28

52.00

(62.92 inc. VAT )

Screen RSW, Honda NSR250 MC21/MC28

This screen fits the TYGA bodywork

Read more

Carbon cover, rev. Counter 91,5mm, Honda

32.14

(38.89 inc. VAT )

Carbon cover, rev. Counter 91,5mm, Honda

This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.

This product is suitable for the following models:

MC21 NSR250

MC22 CBR250RR

NC29 CBR400RR

NC35 RVF400

SC28 CBR900RR

Also available as a complete set with Carbon speedo, temp gauge and rev counter covers, see BPCC-0028

This product might also fit other models.

Read more

Silencer, Stainless Moto Maggot, 43 mm., Ninja 250R, Assy.

208.49

(252.27 inc. VAT )

Same as EXSL-4013(p) but with mounting springs and spring hooks to weld on an existing system. designed to be used with Tyga Performance exhaust systems and other custom exhausts. Not suitable for stock Ninja system.

TYGA no: EXSL-4013

SKU: kaw-10084 Categories: , , ,
Read more

Sub-frame (TYGA), Suzuki RGV250 VJ22

143.58

(173.73 inc. VAT )

This subframe is a replacement for the stock Suzuki item and to be used in our TYGA seat cowling kits BPFS-0036, BPFS-0037, BPFS-0038 etc. and bolts up to the VJ22 frame without need for modifying any components. It will not fit the stock Suzuki seat cowling.

The subframe is supplied with all the fasteners needed to mount the various components that are housed under the seat cowling and incorporates a battery tray. This product is made in steel but is much smaller than the stock one and weighs much less without compromising strength.

Not to be used on a motorcycle carrying a passenger and rider.

This subframe is only compatible with the TYGA rear seat, the original seat cowling won’t fit.

TYGA no: TYLY-0028 

SKU: suz-10089 Categories: , , , , , ,
Read more

Side cover right black, Honda MSX125 GROM

39.31

(47.57 inc. VAT )

Side cover right black, Honda MSX125 GROM (msx-10019)

OEM Honda part

TYGA no: 83530-K26-900ZD

SKU: MSX-10019 Categories: , , , ,
Read more

Tank filler cap “racing” (central fill hole type), KTM 7 hole

69.87

(84.54 inc. VAT )

<p><strong><span>Tank Filler Cap, Keyless, Racing Type, KTM, 7 Hole</span></strong></p>
<p><span>This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves</span></p>
<p><span>Supplied complete with seals and mounting hardware, it can be installed in minutes.</span></p>
<p><span>This product is suitable for KTM RC series sports bike models (RC125/200/250 and 390)</span></p>
<p><span>Fits all KTM RC models which are using the OEM filler cap with code: 90507008000 (2014-2016) but also may fit on later models using&nbsp; a 7 hole filler cap.</span></p>
<p><span>Suitable for the following models:</span></p>
<p><span>KTM</span></p>
<ul>
<li><span>KTM RC125</span></li>
<li><span>KTM RC200</span></li>
<li><span>KTM RC250</span></li>
<li><span>KTM RC390</span></li>

**** Please check photo 2 ****
</ul>

TYGA no: TYLY-0267

SKU: alg-10395 Categories: , , , , , , , , ,
Read more

Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, CBR600RR forks to fit NC35

673.59

(815.04 inc. VAT )

CNC machined TYGA triple clamp set for your NSR250 MC28.

These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!

They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-3314

SKU: hon-11249 Categories: , , , , ,
Read more

Cover, Lower Left, Carbon, Assy, VFR750 3rd Gen, 90-93

153.21

(185.38 inc. VAT )

Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97

This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.

Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.

For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers

See also our other sets with silencer included:

EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).

**Important Note**

The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.

TYGA no: BPCX-7049

SKU: hon-11339 Categories: , , , ,
Read more