Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Front spacer wheel kit, fork conversion CBR600RR 05-06.

36.64

(44.33 inc. VAT )

Wheel, Front, Spacer Kit. ’05-’06 CBR600RR fork conversion.

These spacers are designed to allow the standard NSR250, NC30/35 front wheel to be used together with the ’05-’06 model CBR600RR forks when used with our CBR600RR triple clamp conversion.

Note that the upper/lower triple clamp bore dimensions are 48mm – 53mm.

The standard ’05-’06 axle shaft is too large a diameter to fit the NSR/NC wheel, so these spacer bushes are used to allow the use of the smaller axle shaft. The standard NSR250/NC30 shaft is a little too short, so we recommend using an RVF400 axle.

The NSR/NC disc mounting face is 100mm wide. The disc pitch, centerline to centerline of the rotors should be 138mm, and the discs 310mm in diameter.

RVF750R RC45 or NR750 discs can be used

Read more

Carbon tank cover, Yamaha R1 2007-8

224.38

(271.50 inc. VAT )

Tank Cover (Carbon) 2007-8 Yamaha R1.

Let your bike stand our from the crowd.

TYGA no: BPCX-7202

SKU: yam-10012 Categories: ,
Read more

Fairingstay T10/RC211V, NC35

86.26

(104.37 inc. VAT )

Lightweight laser cut steel stay designed specifically to mount the T10 and RC211V style fairings BPFU-9118, BPFU-9120 and BPFU-9117 and retains stock instrument cluster for the NC35.

Do not use with other model fairings

Compatible with:

TYGA T10 and RC211V kits for the NC35

TYGA no: TYLY-1018

SKU: hon-10153 Categories: , , , , , ,
Read more

Triple clamp set CNC black, Honda VFR400

673.59

(815.04 inc. VAT )

CNC machined TYGA triple clamp set for your VFR400R/NC30.

These stylish, all aluminium triple clamps are a direct replacement for theVFR400R/NC30, and with the help of FEA testing not only do they look fantastic, but they perform!

They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-1244

SKU: hon-10620 Categories: , , , , ,
Read more

Carbon frame cover, Aprilia RS250 MK1 / MK2

326.68

(395.28 inc. VAT )

Carbon fuel tank MK1, Aprilia RS250

Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave.

These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.

TYGA no: OO1501KP/TYGA

SKU: apr-10103 Categories: , , , , ,
Read more

Carbon front fender, Kawasaki Z125 2016 –

193.40

(234.01 inc. VAT )

Front Fender, (Carbon) Z125

TYGA no:  BPCF-7038 

SKU: kaw-10056 Categories: , , ,
Read more

Set full race system under belly with long stainless silencer with carbon cap, Honda MSX125SF GROM

480.85

(581.83 inc. VAT )

Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Long

This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (DB killer included)

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.

A useful increase in peak power and further gains could probably be had with remapping etc.

Similar Products:

Please also see:

EXPS-0068 Stainless, Underbelly, with short silencer

<iframe width= 560 height= 315 src= https://www.youtube.com/embed/mSTQKSWArE0 frameborder= 0 allowfullscreen></iframe>

TYGA no: EXPS-0064

SKU: MSX-10349 Categories: , , , , , , , ,
Read more

O- ring for exhaust, RGV250 / RS250

5.97

(7.22 inc. VAT )

Replacement O rings for the TYGA exhaust manifold used with the TYGA expansion chamber.

Remember to order four of these items to service both expansion chambers.

This is a replacement part. When ordering chambers, this item is included in the price and you do not need to order this parts separately.

Compatible with the following TYGA systems:

EXCS-0007

EXCS-0008

EXCS-0009

EXCS-0010

EXCS-0011

EXCS-0014

EXCS-0016

EXCS-0018

TYGA no: EXOR-0001

SKU: alg-10024 Categories: , , , , , , , , ,
Read more