Seat set street Tyga doubleseat, NC30 kit
€748.25
Seat set street Tyga doubleseat, NC30 kit
Practicality
This seat cowling kit retains the stock NC30 sub frame and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.
This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point. Rear light LED.
The seat cowling keeps the tank in the stock position and the fuel cock is accessible.
Compatibility
This kit can be used with either stock Honda fairings or TYGA ones. If used with hon-10065 (as shown in the photos), some repositioning of the side stays is required because hon-10065 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.
This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats and some modification of the electrical component positions as well as stays for the front sub frame and tank mounting positions.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0078
SKU: hon-10067 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Lower Cowling (Carbon), NC35, Stock Shape
€631.04
Stock shaped one piece lower in carbon conprising what is left right and lower part of inner cowling on OEM panels. Compatible with our stock shaped NC35 carbon upper. See also BPFS-0065, BPFS-0066, BPFS-0067 and BPFS-0068 for savings.
PLEASE ALLOW TWO WEEKS BEFORE SHIPPING. PARTS ARE MADE TO ORDER
TYGA no: BPCL-0103
SKU: hon-10841 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Lower Triple Clamp, CNC Black, RVF400R Forks / NC30 Shaft
€367.66
Lower Triple Clamp, CNC Black, VFR400R Forks/NC30 Shaft
CNC machined TYGA lower triple clamp for the Honda VFR400R/NC30 to take RVF400/NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-MR7-003
Bearings: 91016-MR7-003
This product is also sold as part of a set
TYLY-1644 Triple Clamp Set, CNC Black,RVF400/NC35 forks to fit RVF400R/NC30.
Carbon exhaust guard, Honda NR750
€130.42
Exhaust Guard, Carbon, Honda NR750
This lightweight carbon exhaust guard replaces the heavy and ugly steel stock one and is molded the same shape for easy installation. This product is made using specially formulated high temperature resin and has a backing layer of carbon/Kevlar. Note this should be installed with mat, heat guard 50608-MT7-000 (NOT INCLUDED) or similar to prevent excessive heat reaching the guard.
Please note the photos of the heat mat 50608-MT7-000 are for reference and is not included with this product.
Top Triple clamp CNC black kit , Honda NSR250 MC18/MC21/MC28
€218.46
Top Triple Clamp Set, CNC Black, NSR250
CNC machined TYGA top triple clamp with detachable ignition switch/lock holder for your NSR250.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-1441Â
SKU: hon-10269 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopLower Cowling, Rear, Carbon, Special, RGV250 VJ23
€326.68
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
Kit, Bodywork, GRP, stock shape, with Carbon tank, NSR250 MC28, Painted Rothmans
€3,430.87
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0186
SKU: hon-10968 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersTYGA bike dust cover two tone red/black, Gilera
€65.05
TYGA Bike Dust Cover, Red/Black, DUCATI
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0147
SKU: alg-10397 Categories: ALL products, Bike covers, By model, Merchandise, Shop, Universal parts