Triple Clamp Set, CNC Silver, NSR250, MC28
€619.36
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0641
SKU: hon-10873 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, Stock list, all modelsSet, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
€1,373.19
Set, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0135
SKU: hon-11043 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97 Tag: Exhaust systemsCarbon race airbox MK1/MK2, Aprilia RS250
€451.00 €412.40
Carbon race airbox MK2, Aprilia RS250 (apr-10079)
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
Jets #310 – #320(*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
The best aftermarket race airbox in the market, order with confidence.
* Standard engine
Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.
TYGA no: 004800KT/P.
SKU: apr-10079 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, High performance, RS250, ShopFastener, Quick Long M, MC28
€18.13
Fastener, Quick Long M, MC28
TYGA no: 64512-KV3-830
SKU: hon-11138 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Fitting kit for Belly pan, KTM RC
€30.90
Fitting kit for Belly pan
This mounting kit is for our belly pan:
BPFL-7231
BPCL-7231
BPFL-7331
BPCL-7331
TYGA no: TYBP-?
SKU: ktm-10171 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, KTM, RC 390Seat Pad, NSR250V
€67.02
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPSP-0008
SKU: hon-11062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Seal, Sw/Arm Bearing L., MC28
€6.00
Seal, Sw/Arm Bearing L., MC28
TYGA no: 91202-MR7-003
SKU: hon-11114 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28